openwrt/target/linux/ramips/dts/FONERA20N.dts

/dts-v1/;

/include/ "rt3050.dtsi"

/ {
	compatible = "FONERA20N", "ralink,rt3052-soc";
	model = "La Fonera 2.0N";

	palmbus@10000000 {
		sysc@0 {
			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
			ralink,uartmux = "gpio";
			ralink,wdtmux = <1>;
		};

		gpio0: gpio@600 {
			status = "okay";
		};

	};

	cfi@1f000000 {
		compatible = "cfi-flash";
		reg = <0x1f000000 0x800000>;

		bank-width = <2>;
		device-width = <2>;
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		partition@30000 {
			label = "u-boot-env";
			reg = <0x30000 0x10000>;
			read-only;
		};

		factory: partition@40000 {
			label = "factory";
			reg = <0x40000 0x10000>;
			read-only;
		};

		partition@50000 {
			label = "firmware";
			reg = <0x50000 0x7b0000>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		wifi {
			label = "fonera20n:orange:wifi";
			gpios = <&gpio0 7 1>;
		};
		power {
			label = "fonera20n:green:power";
			gpios = <&gpio0 9 1>;
		};
		usb {
			label = "fonera20n:orange:usb";
			gpios = <&gpio0 14 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;
		reset {
			label = "reset";
			gpios = <&gpio0 12 1>;
			linux,code = <0x198>;
		};
		switch {
			label = "switch";
			gpios = <&gpio0 13 1>;
			linux,code = <0x101>;
		};
	};

	ethernet@10100000 {
		status = "okay";
	};

	esw@10110000 {
		status = "okay";
		ralink,portmap = <0x2f>;

		port@0 {
			compatible = "swconfig,port";
			swconfig,segment = "lan";
			swconfig,portmap = <0 4>;
		};
		port@1 {
			compatible = "swconfig,port";
			swconfig,segment = "lan";
			swconfig,portmap = <1 3>;
		};
		port@2 {
			compatible = "swconfig,port";
			swconfig,segment = "lan";
			swconfig,portmap = <2 2>;
		};
		port@3 {
			compatible = "swconfig,port";
			swconfig,segment = "lan";
			swconfig,portmap = <3 1>;
		};
		port@4 {
			compatible = "swconfig,port";
			swconfig,segment = "wan";
			swconfig,portmap = <4 0>;
		};
	};

	wmac@10180000 {
		status = "okay";
	};

	otg@101c0000 {
		status = "okay";
	};
};