openwrt/target/linux/generic/pending-3.18/020-ssb_update.patch

--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -11,15 +11,17 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <linux/pm.h>
 #include <linux/pci.h>
 #include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/ssb/ssb.h>
 
 
-#ifdef CONFIG_PM
-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int ssb_pcihost_suspend(struct device *d)
 {
+	struct pci_dev *dev = to_pci_dev(d);
 	struct ssb_bus *ssb = pci_get_drvdata(dev);
 	int err;
 
@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
 		return err;
 	pci_save_state(dev);
 	pci_disable_device(dev);
-	pci_set_power_state(dev, pci_choose_state(dev, state));
+
+	/* if there is a wakeup enabled child device on ssb bus,
+	   enable pci wakeup posibility. */
+	device_set_wakeup_enable(d, d->power.wakeup_path);
+
+	pci_prepare_to_sleep(dev);
 
 	return 0;
 }
 
-static int ssb_pcihost_resume(struct pci_dev *dev)
+static int ssb_pcihost_resume(struct device *d)
 {
+	struct pci_dev *dev = to_pci_dev(d);
 	struct ssb_bus *ssb = pci_get_drvdata(dev);
 	int err;
 
-	pci_set_power_state(dev, PCI_D0);
+	pci_back_from_sleep(dev);
 	err = pci_enable_device(dev);
 	if (err)
 		return err;
@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
 
 	return 0;
 }
-#else /* CONFIG_PM */
-# define ssb_pcihost_suspend	NULL
-# define ssb_pcihost_resume	NULL
-#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops ssb_pcihost_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
+};
+
+#endif /* CONFIG_PM_SLEEP */
 
 static int ssb_pcihost_probe(struct pci_dev *dev,
 			     const struct pci_device_id *id)
@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
 {
 	driver->probe = ssb_pcihost_probe;
 	driver->remove = ssb_pcihost_remove;
-	driver->suspend = ssb_pcihost_suspend;
-	driver->resume = ssb_pcihost_resume;
+#ifdef CONFIG_PM_SLEEP
+	driver->driver.pm = &ssb_pcihost_pm_ops;
+#endif
 
 	return pci_register_driver(driver);
 }
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -357,6 +357,16 @@ static void ssb_pcicore_init_hostmode(st
 	pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
 			SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
 
+	/*
+	 * Accessing PCI config without a proper delay after devices reset (not
+	 * GPIO reset) was causing reboots on WRT300N v1.0 (BCM4704).
+	 * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it
+	 * completely. Flushing all writes was also tested but with no luck.
+	 * The same problem was reported for WRT350N v1 (BCM4705), so we just
+	 * sleep here unconditionally.
+	 */
+	usleep_range(1000, 2000);
+
 	/* Enable PCI bridge BAR0 prefetch and burst */
 	val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
 	ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -90,25 +90,6 @@ found:
 }
 #endif /* CONFIG_SSB_PCMCIAHOST */
 
-#ifdef CONFIG_SSB_SDIOHOST
-struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
-{
-	struct ssb_bus *bus;
-
-	ssb_buses_lock();
-	list_for_each_entry(bus, &buses, list) {
-		if (bus->bustype == SSB_BUSTYPE_SDIO &&
-		    bus->host_sdio == func)
-			goto found;
-	}
-	bus = NULL;
-found:
-	ssb_buses_unlock();
-
-	return bus;
-}
-#endif /* CONFIG_SSB_SDIOHOST */
-
 int ssb_for_each_bus_call(unsigned long data,
 			  int (*func)(struct ssb_bus *bus, unsigned long data))
 {
@@ -1154,6 +1135,8 @@ static u32 ssb_tmslow_reject_bitmask(str
 	case SSB_IDLOW_SSBREV_25:     /* TODO - find the proper REJECT bit */
 	case SSB_IDLOW_SSBREV_27:     /* same here */
 		return SSB_TMSLOW_REJECT;	/* this is a guess */
+	case SSB_IDLOW_SSBREV:
+		break;
 	default:
 		WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
 	}