openwrt/target/linux/imx6/patches-4.4/113-serial-imx-make-sure-un...

57 lines
1.9 KiB
Diff
Raw Normal View History

From a58c6360b9eb3a2374b0b069ba9ce7baec0f26df Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 24 Mar 2016 14:24:22 +0100
Subject: [PATCH 3/3] serial: imx: make sure unhandled irqs are disabled
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Make sure that events that are not handled in the irq function don't
trigger an interrupt.
When the serial port is operated in DTE mode, the events for DCD and RI
events are enabled after a system reset by default.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
---
drivers/tty/serial/imx.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1184,11 +1184,32 @@ static int imx_startup(struct uart_port
temp |= (UCR2_RXEN | UCR2_TXEN);
if (!sport->have_rtscts)
temp |= UCR2_IRTS;
+ /*
+ * make sure the edge sensitive RTS-irq is disabled,
+ * we're using RTSD instead.
+ */
+ if (!is_imx1_uart(sport))
+ temp &= ~UCR2_RTSEN;
writel(temp, sport->port.membase + UCR2);
if (!is_imx1_uart(sport)) {
temp = readl(sport->port.membase + UCR3);
- temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP;
+
+ /*
+ * The effect of RI and DCD differs depending on the UFCR_DCEDTE
+ * bit. In DCE mode they control the outputs, in DTE mode they
+ * enable the respective irqs. At least the DCD irq cannot be
+ * cleared on i.MX25 at least, so it's not usable and must be
+ * disabled. I don't have test hardware to check if RI has the
+ * same problem but I consider this likely so it's disabled for
+ * now, too.
+ */
+ temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP |
+ UCR3_RI | UCR3_DCD;
+
+ if (sport->dte_mode)
+ temp &= ~(UCR3_RI | UCR3_DCD);
+
writel(temp, sport->port.membase + UCR3);
}