openwrt/target/linux/lantiq/patches-2.6.39/0006-MIPS-Lantiq-Add-mips_machine-support.patch

From 52a5369d1067d4feddbfa7ff4486a77ac9a2971e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 30 Mar 2011 09:27:54 +0200
Subject: [PATCH 06/13] MIPS: Lantiq: Add mips_machine support

This patch adds support for Gabor's mips_machine patch.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2251/
Patchwork: https://patchwork.linux-mips.org/patch/2358/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                  |    1 +
 arch/mips/lantiq/machtypes.h       |   18 ++++++++++++++++++
 arch/mips/lantiq/prom.h            |    1 +
 arch/mips/lantiq/setup.c           |   25 +++++++++++++++++++++++++
 arch/mips/lantiq/xway/Makefile     |    4 ++--
 arch/mips/lantiq/xway/setup-ase.c  |   19 +++++++++++++++++++
 arch/mips/lantiq/xway/setup-xway.c |   20 ++++++++++++++++++++
 7 files changed, 86 insertions(+), 2 deletions(-)
 create mode 100644 arch/mips/lantiq/machtypes.h
 create mode 100644 arch/mips/lantiq/xway/setup-ase.c
 create mode 100644 arch/mips/lantiq/xway/setup-xway.c

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -190,6 +190,7 @@
 	select SWAP_IO_SPACE
 	select BOOT_RAW
 	select HAVE_CLK
+	select MIPS_MACHINE
 
 config LASAT
 	bool "LASAT Networks platforms"
--- /dev/null
+++ b/arch/mips/lantiq/machtypes.h
@@ -0,0 +1,18 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_MACH_H__
+#define _LANTIQ_MACH_H__
+
+#include <asm/mips_machine.h>
+
+enum lantiq_mach_type {
+	LTQ_MACH_GENERIC = 0,
+};
+
+#endif
--- a/arch/mips/lantiq/prom.h
+++ b/arch/mips/lantiq/prom.h
@@ -20,5 +20,6 @@
 };
 
 extern void ltq_soc_detect(struct ltq_soc_info *i);
+extern void ltq_soc_setup(void);
 
 #endif
--- a/arch/mips/lantiq/setup.c
+++ b/arch/mips/lantiq/setup.c
@@ -14,6 +14,12 @@
 
 #include <lantiq_soc.h>
 
+#include "machtypes.h"
+#include "devices.h"
+#include "prom.h"
+
+unsigned long physical_memsize = 0L;
+
 void __init plat_mem_setup(void)
 {
 	/* assume 16M as default incase uboot fails to pass proper ramsize */
@@ -32,10 +38,32 @@
 		if (!strncmp(e, "memsize=", 8)) {
 			e += 8;
 			if (strict_strtoul(e, 0, &memsize))
-				pr_warn("bad memsize specified\n");
+				pr_warning("bad memsize specified\n");
 		}
 		envp++;
 	}
 	memsize *= 1024 * 1024;
 	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
+	physical_memsize = memsize;
+}
+
+static int __init
+lantiq_setup(void)
+{
+	ltq_soc_setup();
+	mips_machine_setup();
+	return 0;
 }
+
+arch_initcall(lantiq_setup);
+
+static void __init
+lantiq_generic_init(void)
+{
+	/* Nothing to do */
+}
+
+MIPS_MACHINE(LTQ_MACH_GENERIC,
+	     "Generic",
+	     "Generic Lantiq based board",
+	     lantiq_generic_init);
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,4 +1,4 @@
 obj-y := pmu.o ebu.o reset.o gpio.o devices.o
 
-obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
-obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
+obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
+obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/setup-ase.c
@@ -0,0 +1,19 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+#include "devices.h"
+
+void __init ltq_soc_setup(void)
+{
+	ltq_register_ase_asc();
+	ltq_register_gpio();
+	ltq_register_wdt();
+}
--- /dev/null
+++ b/arch/mips/lantiq/xway/setup-xway.c
@@ -0,0 +1,20 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+#include "devices.h"
+
+void __init ltq_soc_setup(void)
+{
+	ltq_register_asc(0);
+	ltq_register_asc(1);
+	ltq_register_gpio();
+	ltq_register_wdt();
+}