openwrt/target/linux/lantiq/files/arch/mips/boot/dts/P2601HNFX.dts

194 lines
3.3 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "ar9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
model = "ZyXEL P-2601HN-Fx";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_green;
led-dsl = &dsl;
led-internet = &online;
led-wifi = &wifi;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
leds {
compatible = "gpio-leds";
power_green: power {
label = "p2601hnfx:green:power";
gpios = <&stp 11 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "p2601hnfx:red:power";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
online: online {
label = "p2601hnfx:green:internet";
gpios = <&stp 13 GPIO_ACTIVE_LOW>;
};
online2 {
label = "p2601hnfx:red:internet";
gpios = <&stp 12 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "p2601hnfx:green:dsl";
gpios = <&stp 14 GPIO_ACTIVE_LOW>;
};
phone {
label = "p2601hnfx:green:phone";
gpios = <&stp 9 GPIO_ACTIVE_LOW>;
};
phone2 {
label = "p2601hnfx:orange:phone";
gpios = <&stp 8 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "p2601hnfx:green:wireless";
gpios = <&stp 15 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "p2601hnfx:orange:wireless";
gpios = <&stp 10 GPIO_ACTIVE_LOW>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
};
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6";
lantiq,open-drain;
lantiq,pull = <0>;
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
};
usb_vbus: regulator-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "USB_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&gsw {
phy-mode = "rmii";
};
&localbus {
flash@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
};
&stp {
status = "okay";
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
&usb_phy0 {
status = "okay";
};
&usb0 {
status = "okay";
vbus-supply = <&usb_vbus>;
};