openwrt/target/linux/lantiq/files/arch/mips/boot/dts/ARV4510PW.dts

228 lines
3.9 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube";
model = "Wippies, Elisa";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power2;
led-running = &power;
led-upgrade = &power;
led-dsl = &adsl;
led-internet = &internet;
led-usb = &led_usb;
led-usb2 = &led_usb2;
led-wifi = &wifi;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x2000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpios 21 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power2: power2 {
label = "power2";
gpios = <&gpios 20 GPIO_ACTIVE_HIGH>;
};
lan1 {
label = "lan1";
gpios = <&gpios 19 GPIO_ACTIVE_HIGH>;
};
lan2 {
label = "lan2";
gpios = <&gpios 18 GPIO_ACTIVE_HIGH>;
};
lan3 {
label = "lan3";
gpios = <&gpios 17 GPIO_ACTIVE_HIGH>;
};
lan4 {
label = "lan4";
gpios = <&gpios 16 GPIO_ACTIVE_HIGH>;
};
wifi: wifi {
label = "wifi";
gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
};
adsl: adsl {
label = "adsl";
gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
};
internet: internet {
label = "internet";
gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
};
internet2 {
label = "internet2";
gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
};
voip {
label = "voip";
gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
};
phone {
label = "phone";
gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
};
phone2 {
label = "phone2";
gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
};
led_usb: usb {
label = "usb";
gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
};
led_usb2: usb2 {
label = "usb2";
gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "usb3";
gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
};
unlabeled {
label = "unlabeled";
gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
};
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu a23";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
exin {
lantiq,groups = "exin1", "exin2";
lantiq,function = "exin";
lantiq,output = <0>;
};
pci_in {
lantiq,groups = "req1", "req2";
lantiq,function = "pci";
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1", "gnt2";
lantiq,function = "pci";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
buttons {
lantiq,pins = "io3", "io14";
lantiq,pull = <2>;
lantiq,output = <0>;
};
};
};
&gpios {
status = "okay";
lantiq,groups = <0x7>;
};
&gsw {
phy-mode = "rmii";
};
&localbus {
flash@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
lantiq,noxip;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x6000 0 0 1 &icu0 135
0x7800 0 0 1 &icu0 66
0x7800 0 0 2 &icu0 66
0x7800 0 0 3 &icu0 66
>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x7>;
};
&vmmc {
status = "okay";
};