openwrt/target/linux/ramips/dts/HC5661A.dts

/dts-v1/;

#include "mt7628an.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
	model = "HiWiFi HC5661A";

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x8000000>;
	};

	gpio-leds {
		compatible = "gpio-leds";

		system {
			label = "hc5661a:blue:system";
			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
		};
		internet {
			label = "hc5661a:blue:internet";
			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
		};
		wlan2g {
			label = "hc5661a:blue:wlan2g";
			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "i2c", "refclk", "wled_an";
			ralink,function = "gpio";
		};
	};
};

&spi0 {
	status = "okay";

	m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		reg = <0>;
		linux,modalias = "m25p80", "w25q128";
		spi-max-frequency = <10000000>;
		m25p,chunked-io = <32>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		partition@30000 {
			label = "hw_panic";
			reg = <0x30000 0x10000>;
			read-only;
		};

		factory: partition@40000 {
			label = "factory";
			reg = <0x40000 0x10000>;
			read-only;
		};

		partition@50000 {
			label = "firmware";
			reg = <0x50000 0xf70000>;
		};

		partition@fc0000 {
			label = "oem";
			reg = <0xfc0000 0x20000>;
			read-only;
		};

		bdinfo: partition@fe0000 {
			label = "bdinfo";
			reg = <0xfe0000 0x10000>;
			read-only;
		};

		partition@ff0000 {
			label = "backup";
			reg = <0xff0000 0x10000>;
			read-only;
		};
	};
};

&ethernet {
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
};

&wmac {
	status = "okay";
};