openwrt/package/boot/uboot-envtools/files/ar71xx

85 lines
1.2 KiB
Plaintext
Raw Normal View History

#!/bin/sh
#
# Copyright (C) 2011-2014 OpenWrt.org
#
[ -e /etc/config/ubootenv ] && exit 0
touch /etc/config/ubootenv
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(board_name)
case "$board" in
a40|\
a60|\
alfa-ap120c|\
all0258n|\
ap121f|\
ap90q|\
arduino-yun|\
cap324|\
cap4200ag|\
carambola2|\
cpe830|\
cpe870|\
cr3000|\
cr5000|\
eap300v2|\
ar71xx: add support for EnGenius ENS202EXT EnGenius ENS202EXT is an outdoor wireless access point with 2-port 10/100 switch, detachable antennas and proprietery PoE. The device is based on Qualcomm/Atheros AR9341 v1. Specifications: - 535/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM - 16 MB of FLASH - UART (J1) header on PCB (unpopulated) - 2x 10/100 Mbps Ethernet - 2.4 GHz, up to 26dBm - 2x external, detachable antennas - 7x LED, 1x button Flash instructions: You have three options: - Use the vendor firmware upgrade page on the web interface and give it the factory.img. This is the easiest way to go about it. - If you have serial access during u-boot, interrupt the normal boot (any key before timeout) and run 'run failsafe_boot'; this will bring you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've bricked the normal firmware. - Use the vendor's management cli, which can be accessed via telnet with the same credentials as the web login (default admin:admin), then issue the following commands: *** Hi admin, welcome to use cli(V-1.6.7) *** ---========= Commands Help =========--- stat -- Status sys -- System wless2 -- 2.4G-Wireless mgmt -- Management tree -- Tree help -- Help reboot -- Reboot ens202ext>mgmt Management ---========= Commands Help =========--- admin -- Administration mvlan -- Management VLAN settings snmp -- SNMP settings backup -- Backup/Restore settings autorb -- Auto reboot settings fwgrade -- Firmware upgrade time -- Time settings wifisch -- Wifi schedule log -- Log diag -- Diagnostics disc -- Device Discovery logout -- Logout help -- Help exit -- Exit ens202ext/mgmt>fwgrade Management --> Firmware upgrade ---========= Commands Help =========--- fwup -- Firmware upgrade help -- Help exit -- Exit ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
2017-04-14 17:08:17 +00:00
ens202ext|\
gl-ar300m|\
hornet-ub|\
hornet-ub-x2|\
jwap230|\
mr1750|\
mr1750v2|\
mr600|\
mr600v2|\
mr900|\
mr900v2|\
nbg6716|\
om5p|\
om5p-ac|\
om5p-acv2|\
om5p-an|\
sr3200|\
tube2h|\
wndr3700|\
xd3200)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
;;
alfa-ap96|\
all0315n|\
om2p|\
om2p-hs|\
om2p-hsv2|\
om2p-hsv3|\
om2p-hsv4|\
om2p-lc|\
om2pv2|\
om2pv4)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
;;
dap-2695-a1|\
wzr-hp-ag300h)
ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
;;
dr531)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0xf800" "0x10000"
;;
rambutan)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
ubootenv_add_uci_config "/dev/mtd1" "0x100000" "0x20000" "0x20000"
;;
qihoo-c301)
ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x10000" "0x10000"
;;
esac
config_load ubootenv
config_foreach ubootenv_add_app_config ubootenv
exit 0