openwrt/target/linux/layerscape/patches-4.4/1097-mtd-fsl-quadspi-use-th...

88 lines
2.7 KiB
Diff
Raw Normal View History

From 5c315652c1b43a6a3abe48c2842cde822ac0ff3c Mon Sep 17 00:00:00 2001
From: Yunhui Cui <B56489@freescale.com>
Date: Wed, 20 Jan 2016 18:40:31 +0800
Subject: [PATCH 097/113] mtd:fsl-quadspi:use the property fields of SPI-NOR
We can get the read/write/erase opcode from the spi nor framework
directly. This patch uses the information stored in the SPI-NOR to
remove the hardcode in the fsl_qspi_init_lut().
Signed-off-by: Yunhui Cui <B56489@freescale.com>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 40 +++++++++++--------------------------
1 file changed, 12 insertions(+), 28 deletions(-)
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -373,9 +373,13 @@ static void fsl_qspi_init_lut(struct fsl
void __iomem *base = q->iobase;
int rxfifo = q->devtype_data->rxfifo;
u32 lut_base;
- u8 cmd, addrlen, dummy;
int i;
+ struct spi_nor *nor = &q->nor[0];
+ u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
+ u8 read_op = nor->read_opcode;
+ u8 read_dm = nor->read_dummy;
+
fsl_qspi_unlock_lut(q);
/* Clear all the LUT table */
@@ -385,20 +389,10 @@ static void fsl_qspi_init_lut(struct fsl
/* Quad Read */
lut_base = SEQID_QUAD_READ * 4;
- if (q->nor_size <= SZ_16M) {
- cmd = SPINOR_OP_READ_1_1_4;
- addrlen = ADDR24BIT;
- dummy = 8;
- } else {
- /* use the 4-byte address */
- cmd = SPINOR_OP_READ_1_1_4;
- addrlen = ADDR32BIT;
- dummy = 8;
- }
-
- qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+ qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
- qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
+ qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
+ LUT1(FSL_READ, PAD4, rxfifo),
base + QUADSPI_LUT(lut_base + 1));
/* Write enable */
@@ -409,16 +403,8 @@ static void fsl_qspi_init_lut(struct fsl
/* Page Program */
lut_base = SEQID_PP * 4;
- if (q->nor_size <= SZ_16M) {
- cmd = SPINOR_OP_PP;
- addrlen = ADDR24BIT;
- } else {
- /* use the 4-byte address */
- cmd = SPINOR_OP_PP;
- addrlen = ADDR32BIT;
- }
-
- qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+ qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) |
+ LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
base + QUADSPI_LUT(lut_base + 1));
@@ -432,10 +418,8 @@ static void fsl_qspi_init_lut(struct fsl
/* Erase a sector */
lut_base = SEQID_SE * 4;
- cmd = q->nor[0].erase_opcode;
- addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
-
- qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+ qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) |
+ LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
/* Erase the whole chip */