openwrt/target/linux/brcm2708/patches-3.18/0069-Fix-the-activity-LED-i...

129 lines
2.7 KiB
Diff
Raw Normal View History

From 31b85ba13aa394c98f2d6955b55f3f9a0623c14d Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Tue, 6 Jan 2015 12:06:55 +0000
Subject: [PATCH 069/114] Fix the activity LED in DT mode
Add a "leds" node to the base DTBs, and a subnode for the activity
LED. You can change the LED function like this:
dtparam=act_led_trigger=heartbeat
Add aliases for the other main nodes (soc, intc).
Issue: linux #757
---
arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 18 ++++++++++++++----
arch/arm/boot/dts/bcm2708-rpi-b.dts | 18 ++++++++++++++----
arch/arm/boot/dts/bcm2708.dtsi | 11 ++++++++++-
3 files changed, 38 insertions(+), 9 deletions(-)
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
@@ -7,11 +7,14 @@
model = "Raspberry Pi Model B+";
aliases {
+ soc = &soc;
spi0 = &spi0;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2s = &i2s;
gpio = &gpio;
+ intc = &intc;
+ leds = &leds;
sound = &sound;
};
@@ -80,12 +83,19 @@
pinctrl-0 = <&i2s_pins>;
};
+&act_led {
+ gpios = <&gpio 47 0>;
+};
/ {
__overrides__ {
- i2s = <&i2s>,"status";
- spi = <&spi0>,"status";
- i2c0 = <&i2c0>,"status";
- i2c1 = <&i2c1>,"status";
+ i2s = <&i2s>,"status";
+ spi = <&spi0>,"status";
+ i2c0 = <&i2c0>,"status";
+ i2c1 = <&i2c1>,"status";
+
+ act_led_gpio = <&act_led>,"gpios:4";
+ act_led_activelow = <&act_led>,"gpios:8";
+ act_led_trigger = <&act_led>,"linux,default-trigger";
};
};
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -7,11 +7,14 @@
model = "Raspberry Pi Model B";
aliases {
+ soc = &soc;
spi0 = &spi0;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2s = &i2s;
gpio = &gpio;
+ intc = &intc;
+ leds = &leds;
sound = &sound;
};
@@ -80,12 +83,19 @@
pinctrl-0 = <&i2s_pins>;
};
+&act_led {
+ gpios = <&gpio 16 1>;
+};
/ {
__overrides__ {
- i2s = <&i2s>,"status";
- spi = <&spi0>,"status";
- i2c0 = <&i2c0>,"status";
- i2c1 = <&i2c1>,"status";
+ i2s = <&i2s>,"status";
+ spi = <&spi0>,"status";
+ i2c0 = <&i2c0>,"status";
+ i2c1 = <&i2c1>,"status";
+
+ act_led_gpio = <&act_led>,"gpios:4";
+ act_led_activelow = <&act_led>,"gpios:8";
+ act_led_trigger = <&act_led>,"linux,default-trigger";
};
};
--- a/arch/arm/boot/dts/bcm2708.dtsi
+++ b/arch/arm/boot/dts/bcm2708.dtsi
@@ -11,7 +11,7 @@
bootargs = "";
};
- soc {
+ soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -76,6 +76,15 @@
#size-cells = <0>;
status = "disabled";
};
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ act_led: act {
+ label = "ACT";
+ linux,default-trigger = "mmc0";
+ };
+ };
};
clocks {