2018-06-29 03:44:58 +00:00
|
|
|
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_BOARD_NAME TPLINK_BOARD_ID
|
2018-05-30 13:18:50 +00:00
|
|
|
|
|
|
|
define rootfs_align
|
|
|
|
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
|
|
|
|
endef
|
|
|
|
|
|
|
|
# combine kernel and rootfs into one image
|
|
|
|
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
|
|
|
|
# <type> is "sysupgrade" or "factory"
|
|
|
|
#
|
|
|
|
# -a align the rootfs start on an <align> bytes boundary
|
|
|
|
# -j add jffs2 end-of-filesystem markers
|
|
|
|
# -s strip padding from end of the image
|
|
|
|
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
|
|
|
|
define Build/mktplinkfw
|
|
|
|
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
|
|
|
|
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
|
|
|
|
-m $(TPLINK_HEADER_VERSION) \
|
|
|
|
-k $(IMAGE_KERNEL) \
|
|
|
|
-r $@ \
|
|
|
|
-o $@.new \
|
|
|
|
-j -X 0x40000 \
|
|
|
|
-a $(call rootfs_align,$(FILESYSTEM)) \
|
|
|
|
$(wordlist 2,$(words $(1)),$(1)) \
|
|
|
|
$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
|
|
|
|
endef
|
|
|
|
|
|
|
|
# mktplinkfw-combined
|
|
|
|
#
|
|
|
|
# -c combined image
|
|
|
|
define Build/mktplinkfw-combined
|
|
|
|
$(STAGING_DIR_HOST)/bin/mktplinkfw \
|
|
|
|
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $(1) \
|
|
|
|
-m $(TPLINK_HEADER_VERSION) \
|
|
|
|
-k $@ \
|
|
|
|
-o $@.new \
|
|
|
|
-s -S \
|
|
|
|
-c
|
|
|
|
@mv $@.new $@
|
|
|
|
endef
|
|
|
|
|
ath79: add support for Archer C58/C59 v1
This commit adds support for the Archer C58 v1 and C59 v1, previously
supported in the ar71xx target.
CPU: Qualcomm QCA9561
RAM: 64M (C58) / 128M (C59)
FLASH: 8M (C58) / 16M (C59)
WiFi: QCA9561 bgn 3x3:3
QCA9888 nac 2x2:2
LED: Power, WiFi 2.4, WiFi 5, WAN green, WAN amber, LAN, WPS
Only C59: USB
BTN: WPS, WiFi, Reset
Installation
------------
Via Web-UI:
Update factory image via Web-UI.
Via TFTP:
Rename factory image to "tp_recovery.bin" and place it in the root-dir
of your tftp server. Configure to listen on 192.168.0.66. Power up the
router while holding down the reset-button. The router will flash itself
and reboot.
Note: For TFTP, you might need a switch between router and computer, as
link establishment might take to long.
Signed-off-by: David Bauer <mail@david-bauer.net>
2018-10-31 19:19:49 +00:00
|
|
|
define Build/uImageArcher
|
|
|
|
mkimage -A $(LINUX_KARCH) \
|
|
|
|
-O linux -T kernel \
|
|
|
|
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
|
|
|
|
-n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
|
|
|
|
@mv $@.new $@
|
|
|
|
endef
|
|
|
|
|
2018-05-30 13:18:50 +00:00
|
|
|
define Device/tplink
|
|
|
|
TPLINK_HWREV := 0x1
|
|
|
|
TPLINK_HEADER_VERSION := 1
|
|
|
|
LOADER_TYPE := gz
|
|
|
|
KERNEL := kernel-bin | append-dtb | lzma
|
|
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | tplink-v1-header
|
2018-12-06 11:07:56 +00:00
|
|
|
IMAGES += factory.bin
|
2018-05-30 13:18:50 +00:00
|
|
|
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade | append-metadata
|
|
|
|
IMAGE/factory.bin := append-rootfs | mktplinkfw factory
|
|
|
|
endef
|
|
|
|
|
|
|
|
define Device/tplink-nolzma
|
|
|
|
$(Device/tplink)
|
|
|
|
LOADER_FLASH_OFFS := 0x22000
|
|
|
|
COMPILE := loader-$(1).gz
|
|
|
|
COMPILE/loader-$(1).gz := loader-okli-compile
|
2018-06-06 19:01:32 +00:00
|
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 7680
|
2018-05-30 13:18:50 +00:00
|
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | tplink-v1-header
|
|
|
|
endef
|
|
|
|
|
|
|
|
define Device/tplink-4m
|
|
|
|
$(Device/tplink-nolzma)
|
|
|
|
TPLINK_FLASHLAYOUT := 4M
|
|
|
|
IMAGE_SIZE := 3904k
|
|
|
|
endef
|
|
|
|
|
|
|
|
define Device/tplink-4mlzma
|
|
|
|
$(Device/tplink)
|
|
|
|
TPLINK_FLASHLAYOUT := 4Mlzma
|
|
|
|
IMAGE_SIZE := 3904k
|
|
|
|
endef
|
|
|
|
|
|
|
|
define Device/tplink-8m
|
|
|
|
$(Device/tplink-nolzma)
|
|
|
|
TPLINK_FLASHLAYOUT := 8M
|
|
|
|
IMAGE_SIZE := 7936k
|
|
|
|
endef
|
|
|
|
|
|
|
|
define Device/tplink-8mlzma
|
|
|
|
$(Device/tplink)
|
|
|
|
TPLINK_FLASHLAYOUT := 8Mlzma
|
|
|
|
IMAGE_SIZE := 7936k
|
|
|
|
endef
|
2018-06-26 05:25:33 +00:00
|
|
|
|
|
|
|
define Device/tplink-16mlzma
|
|
|
|
$(Device/tplink)
|
|
|
|
TPLINK_FLASHLAYOUT := 16Mlzma
|
|
|
|
IMAGE_SIZE := 15872k
|
|
|
|
endef
|
ath79: add support for Archer C58/C59 v1
This commit adds support for the Archer C58 v1 and C59 v1, previously
supported in the ar71xx target.
CPU: Qualcomm QCA9561
RAM: 64M (C58) / 128M (C59)
FLASH: 8M (C58) / 16M (C59)
WiFi: QCA9561 bgn 3x3:3
QCA9888 nac 2x2:2
LED: Power, WiFi 2.4, WiFi 5, WAN green, WAN amber, LAN, WPS
Only C59: USB
BTN: WPS, WiFi, Reset
Installation
------------
Via Web-UI:
Update factory image via Web-UI.
Via TFTP:
Rename factory image to "tp_recovery.bin" and place it in the root-dir
of your tftp server. Configure to listen on 192.168.0.66. Power up the
router while holding down the reset-button. The router will flash itself
and reboot.
Note: For TFTP, you might need a switch between router and computer, as
link establishment might take to long.
Signed-off-by: David Bauer <mail@david-bauer.net>
2018-10-31 19:19:49 +00:00
|
|
|
|
|
|
|
define Device/tplink-safeloader
|
|
|
|
$(Device/tplink)
|
|
|
|
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header
|
|
|
|
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
|
|
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
|
|
endef
|
|
|
|
|
|
|
|
define Device/tplink-safeloader-uimage
|
|
|
|
$(Device/tplink-safeloader)
|
|
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImageArcher lzma
|
|
|
|
endef
|