openwrt/target/linux/brcm2708/patches-4.19/950-0331-overlays-Fix-multi...

58 lines
2.1 KiB
Diff
Raw Normal View History

From 649efe5db3900ed3bbfd3c3daa3b96d8fc0b9d68 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Fri, 22 Mar 2019 16:44:47 +0000
Subject: [PATCH] overlays: Fix multiple-instantiation of sc16is7xx*
The registration of the fixed clocks uses the node name as the clock
name, causing a clash if two clock nodes have the same name, regardless
of the path to the node. Fix the issue by overwriting the clock node
names using the value of the "addr" parameter, providing a crude
disambiguation. (A bit of string pasting to form "sc16is752_clk_<addr>"
would have been nice, but that is outside the abilities of the overlay
parameter mechanism.)
Also give the sc16is750-i2c overlay the xtal parameter for symmetry.
See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=235650
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
arch/arm/boot/dts/overlays/README | 1 +
arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts | 3 ++-
arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts | 2 +-
3 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1725,6 +1725,7 @@ Info: Overlay for the NXP SC16IS750 UA
Load: dtoverlay=sc16is750-i2c,<param>=<val>
Params: int_pin GPIO used for IRQ (default 24)
addr Address (default 0x48)
+ xtal On-board crystal frequency (default 14745600)
Name: sc16is752-i2c
--- a/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts
+++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts
@@ -31,7 +31,8 @@
__overrides__ {
int_pin = <&sc16is750>,"interrupts:0";
- addr = <&sc16is750>,"reg:0";
+ addr = <&sc16is750>,"reg:0",<&sc16is750_clk>,"name";
+ xtal = <&sc16is750>,"clock-frequency:0";
};
};
--- a/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts
+++ b/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts
@@ -34,7 +34,7 @@
__overrides__ {
int_pin = <&sc16is752>,"interrupts:0";
- addr = <&sc16is752>,"reg:0";
+ addr = <&sc16is752>,"reg:0",<&sc16is752_clk>,"name";
xtal = <&sc16is752>,"clock-frequency:0";
};
};