openwrt/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-dr...

338 lines
10 KiB
Diff
Raw Normal View History

--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -139,7 +139,7 @@ config SSB_DRIVER_MIPS
config SSB_SFLASH
bool "SSB serial flash support"
- depends on SSB_DRIVER_MIPS && BROKEN
+ depends on SSB_DRIVER_MIPS
default y
# Assumption: We are on embedded, if we compile the MIPS core.
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -1,14 +1,22 @@
/*
* Sonics Silicon Backplane
* ChipCommon serial flash interface
+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2010, Broadcom Corporation
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <linux/platform_device.h>
+#include <linux/delay.h>
#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
#include "ssb_private.h"
+#define NUM_RETRIES 3
+
static struct resource ssb_sflash_resource = {
.name = "ssb_sflash",
.start = SSB_FLASH2,
@@ -17,7 +25,7 @@ static struct resource ssb_sflash_resour
};
struct platform_device ssb_sflash_dev = {
- .name = "ssb_sflash",
+ .name = "bcm47xx-sflash",
.resource = &ssb_sflash_resource,
.num_resources = 1,
};
@@ -83,10 +91,185 @@ static void ssb_sflash_cmd(struct ssb_ch
pr_err("SFLASH control command failed (timeout)!\n");
}
+static void ssb_sflash_write_u8(struct ssb_chipcommon *chipco, u32 offset, u8 byte)
+{
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
+ chipco_write32(chipco, SSB_CHIPCO_FLASHDATA, byte);
+}
+
+/* Poll for command completion. Returns zero when complete. */
+static int ssb_sflash_poll(struct bcm47xxsflash *dev, u32 offset)
+{
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (offset >= chipco->sflash.size)
+ return -22;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ /* Check for ST Write In Progress bit */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RDSR);
+ return chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
+ & SSB_CHIPCO_FLASHDATA_ST_WIP;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ /* Check for Atmel Ready bit */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_STATUS);
+ return !(chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
+ & SSB_CHIPCO_FLASHDATA_AT_READY);
+ }
+
+ return 0;
+}
+
+
+static int sflash_st_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ int written = 1;
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ /* Enable writes */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
+ ssb_sflash_write_u8(chipco, offset, *buf++);
+ /* Issue a page program with CSA bit set */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_CSA | SSB_CHIPCO_FLASHCTL_ST_PP);
+ offset++;
+ len--;
+ while (len > 0) {
+ if ((offset & 255) == 0) {
+ /* Page boundary, poll droping cs and return */
+ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
+ udelay(1);
+ if (!ssb_sflash_poll(dev, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return written;
+ } else {
+ /* Write single byte */
+ ssb_sflash_cmd(chipco,
+ SSB_CHIPCO_FLASHCTL_ST_CSA |
+ *buf++);
+ }
+ written++;
+ offset++;
+ len--;
+ }
+ /* All done, drop cs & poll */
+ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
+ udelay(1);
+ if (!ssb_sflash_poll(dev, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return written;
+}
+
+static int sflash_at_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ struct ssb_chipcommon *chipco = dev->scc;
+ u32 page, byte, mask;
+ int ret = 0;
+
+ mask = dev->blocksize - 1;
+ page = (offset & ~mask) << 1;
+ byte = offset & mask;
+ /* Read main memory page into buffer 1 */
+ if (byte || (len < dev->blocksize)) {
+ int i = 100;
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
+ /* 250 us for AT45DB321B */
+ while (i > 0 && ssb_sflash_poll(dev, offset)) {
+ udelay(10);
+ i--;
+ }
+ BUG_ON(!ssb_sflash_poll(dev, offset));
+ }
+ /* Write into buffer 1 */
+ for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) {
+ ssb_sflash_write_u8(chipco, byte++, *buf++);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
+ }
+ /* Write buffer 1 into main memory page */
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
+
+ return ret;
+}
+
+/* Write len bytes starting at offset into buf. Returns number of bytes
+ * written. Caller should poll for completion.
+ */
+static int ssb_sflash_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ int ret = 0, tries = NUM_RETRIES;
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (!len)
+ return 0;
+
+ if ((offset + len) > chipco->sflash.size)
+ return -EINVAL;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ do {
+ ret = sflash_st_write(dev, offset, len, buf);
+ tries--;
+ } while (ret == -EAGAIN && tries > 0);
+
+ if (ret == -EAGAIN && tries == 0) {
+ pr_info("ST Flash rejected write\n");
+ ret = -EIO;
+ }
+ break;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ ret = sflash_at_write(dev, offset, len, buf);
+ break;
+ }
+
+ return ret;
+}
+
+/* Erase a region. Returns number of bytes scheduled for erasure.
+ * Caller should poll for completion.
+ */
+static int ssb_sflash_erase(struct bcm47xxsflash *dev, u32 offset)
+{
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (offset >= chipco->sflash.size)
+ return -EINVAL;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
+ /* Newer flashes have "sub-sectors" which can be erased independently
+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
+ * before.
+ */
+ if (dev->blocksize < (64 * 1024))
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SSE);
+ else
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SE);
+ return dev->blocksize;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset << 1);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
+ return dev->blocksize;
+ }
+
+ return 0;
+}
+
/* Initialize serial flash access */
int ssb_sflash_init(struct ssb_chipcommon *cc)
{
- struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
+ struct bcm47xxsflash *sflash = &cc->sflash;
const struct ssb_sflash_tbl_e *e;
u32 id, id2;
@@ -150,17 +333,21 @@ int ssb_sflash_init(struct ssb_chipcommo
sflash->numblocks = e->numblocks;
sflash->size = sflash->blocksize * sflash->numblocks;
sflash->present = true;
-
- pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
- e->name, e->blocksize, e->numblocks);
+ sflash->poll = ssb_sflash_poll;
+ sflash->write = ssb_sflash_write;
+ sflash->erase = ssb_sflash_erase;
+ sflash->type = BCM47XX_SFLASH_SSB;
+ sflash->scc = cc;
+
+ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+ e->name, sflash->size / 1024, sflash->blocksize,
+ sflash->numblocks);
/* Prepare platform device, but don't register it yet. It's too early,
* malloc (required by device_private_init) is not available yet. */
ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
- sflash->size;
+ sflash->size;
ssb_sflash_dev.dev.platform_data = sflash;
- pr_err("Serial flash support is not implemented yet!\n");
-
- return -ENOTSUPP;
+ return 0;
}
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -545,6 +545,15 @@ static int ssb_devices_register(struct s
dev_idx++;
}
+#ifdef CONFIG_SSB_SFLASH
+ if (bus->chipco.sflash.present) {
+ err = platform_device_register(&ssb_sflash_dev);
+ if (err)
+ ssb_printk(KERN_ERR PFX
+ "Error registering serial flash\n");
+ }
+#endif
+
#ifdef CONFIG_SSB_DRIVER_MIPS
if (bus->mipscore.pflash.present) {
err = platform_device_register(&ssb_pflash_dev);
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -231,6 +231,7 @@ extern u32 ssb_chipco_watchdog_timer_set
/* driver_chipcommon_sflash.c */
#ifdef CONFIG_SSB_SFLASH
int ssb_sflash_init(struct ssb_chipcommon *cc);
+extern struct platform_device ssb_sflash_dev;
#else
static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
{
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -13,6 +13,8 @@
* Licensed under the GPL version 2. See COPYING for details.
*/
+#include <linux/mtd/bcm47xxsflash.h>
+
/** ChipCommon core registers. **/
#define SSB_CHIPCO_CHIPID 0x0000
@@ -121,6 +123,17 @@
#define SSB_CHIPCO_FLASHCTL_BUSY SSB_CHIPCO_FLASHCTL_START
#define SSB_CHIPCO_FLASHADDR 0x0044
#define SSB_CHIPCO_FLASHDATA 0x0048
+/* Status register bits for ST flashes */
+#define SSB_CHIPCO_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
+#define SSB_CHIPCO_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
+#define SSB_CHIPCO_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
+#define SSB_CHIPCO_FLASHDATA_ST_BP_SHIFT 2
+#define SSB_CHIPCO_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
+/* Status register bits for Atmel flashes */
+#define SSB_CHIPCO_FLASHDATA_AT_READY 0x80
+#define SSB_CHIPCO_FLASHDATA_AT_MISMATCH 0x40
+#define SSB_CHIPCO_FLASHDATA_AT_ID_MASK 0x38
+#define SSB_CHIPCO_FLASHDATA_AT_ID_SHIFT 3
#define SSB_CHIPCO_BCAST_ADDR 0x0050
#define SSB_CHIPCO_BCAST_DATA 0x0054
#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
@@ -504,7 +517,7 @@
#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
-#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
+#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */
#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
@@ -595,6 +608,9 @@ struct ssb_chipcommon {
struct ssb_chipcommon_pmu pmu;
u32 ticks_per_ms;
u32 max_timer_ms;
+#ifdef CONFIG_SSB_SFLASH
+ struct bcm47xxsflash sflash;
+#endif
};
static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)