openwrt/package/kernel/linux/modules/can.mk

293 lines
7.5 KiB
Makefile
Raw Normal View History

#
# Copyright (C) 2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
CAN_MENU:=CAN Support
define KernelPackage/can
SUBMENU:=$(CAN_MENU)
TITLE:=CAN bus support
KCONFIG:=\
CONFIG_CAN=m \
CONFIG_CAN_DEV \
CONFIG_CAN_CALC_BITTIMING=y \
CONFIG_CAN_LEDS=y \
CONFIG_CAN_AT91=n \
CONFIG_CAN_TI_HECC=n \
CONFIG_CAN_MCP251X=n \
CONFIG_CAN_BFIN=n \
CONFIG_CAN_JANZ_ICAN3=n \
CONFIG_PCH_CAN=n \
CONFIG_CAN_GRCAN=n \
CONFIG_CAN_CC770=n \
CONFIG_CAN_MSCAN=n \
CONFIG_CAN_SJA1000=n \
CONFIG_CAN_SOFTING=n \
CONFIG_NET_EMATCH_CANID=n \
CONFIG_CAN_DEBUG_DEVICES=n
FILES:=$(LINUX_DIR)/drivers/net/can/can-dev.ko \
$(LINUX_DIR)/net/can/can.ko
AUTOLOAD:=$(call AutoProbe,can can-dev)
endef
define KernelPackage/can/description
Kernel module for CAN bus support.
endef
$(eval $(call KernelPackage,can))
define AddDepends/can
SUBMENU:=$(CAN_MENU)
DEPENDS+=kmod-can $(1)
endef
define KernelPackage/can-bcm
TITLE:=Broadcast Manager CAN Protcol
KCONFIG:=CONFIG_CAN_BCM
FILES:=$(LINUX_DIR)/net/can/can-bcm.ko
AUTOLOAD:=$(call AutoProbe,can-bcm)
$(call AddDepends/can)
endef
define KernelPackage/can-bcm/description
The Broadcast Manager offers content filtering, timeout monitoring,
sending of RTR frames, and cyclic CAN messages without permanent user
interaction.
endef
$(eval $(call KernelPackage,can-bcm))
define KernelPackage/can-c-can
TITLE:=BOSCH C_CAN/D_CAN drivers
KCONFIG:=CONFIG_CAN_C_CAN
FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can.ko
AUTOLOAD:=$(call AutoProbe,c_can)
$(call AddDepends/can)
endef
define KernelPackage/can-c-can/description
This driver adds generic support for the C_CAN/D_CAN chips.
endef
$(eval $(call KernelPackage,can-c-can))
define KernelPackage/can-c-can-pci
TITLE:=PCI Bus based BOSCH C_CAN/D_CAN driver
KCONFIG:=CONFIG_CAN_C_CAN_PCI
DEPENDS:=kmod-can-c-can @PCI_SUPPORT
FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_pci.ko
AUTOLOAD:=$(call AutoProbe,c_can_pci)
$(call AddDepends/can)
endef
define KernelPackage/can-c-can-pci/description
This driver adds support for the C_CAN/D_CAN chips connected
to the PCI bus.
endef
$(eval $(call KernelPackage,can-c-can-pci))
define KernelPackage/can-c-can-platform
TITLE:=Platform Bus based BOSCH C_CAN/D_CAN driver
KCONFIG:=CONFIG_CAN_C_CAN_PLATFORM
DEPENDS:=kmod-can-c-can +kmod-regmap-core
FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_platform.ko
AUTOLOAD:=$(call AutoProbe,c_can_platform)
$(call AddDepends/can)
endef
define KernelPackage/can-c-can-platform/description
This driver adds support for the C_CAN/D_CAN chips connected
to the "platform bus" (Linux abstraction for directly to the
processor attached devices) which can be found on various
boards from ST Microelectronics (http://www.st.com) like the
SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
boards like am335x, dm814x, dm813x and dm811x.
endef
$(eval $(call KernelPackage,can-c-can-platform))
define KernelPackage/can-flexcan
TITLE:=Support for Freescale FLEXCAN based chips
KCONFIG:=CONFIG_CAN_FLEXCAN
FILES:=$(LINUX_DIR)/drivers/net/can/flexcan.ko
AUTOLOAD:=$(call AutoProbe,flexcan)
$(call AddDepends/can,@TARGET_imx6)
endef
define KernelPackage/can-flexcan/description
Freescale FLEXCAN CAN bus controller implementation.
endef
$(eval $(call KernelPackage,can-flexcan))
define KernelPackage/can-gw
TITLE:=CAN Gateway/Router
KCONFIG:=CONFIG_CAN_GW
FILES:=$(LINUX_DIR)/net/can/can-gw.ko
AUTOLOAD:=$(call AutoProbe,can-gw)
$(call AddDepends/can)
endef
define KernelPackage/can-gw/description
The CAN Gateway/Router is used to route (and modify) CAN frames.
endef
$(eval $(call KernelPackage,can-gw))
define KernelPackage/can-raw
TITLE:=Raw CAN Protcol
KCONFIG:=CONFIG_CAN_RAW
FILES:=$(LINUX_DIR)/net/can/can-raw.ko
AUTOLOAD:=$(call AutoProbe,can-raw)
$(call AddDepends/can)
endef
define KernelPackage/can-raw/description
The raw CAN protocol option offers access to the CAN bus via
the BSD socket API.
endef
$(eval $(call KernelPackage,can-raw))
define KernelPackage/can-slcan
TITLE:=Serial / USB serial CAN Adaptors (slcan)
KCONFIG:=CONFIG_CAN_SLCAN
FILES:=$(LINUX_DIR)/drivers/net/can/slcan.ko
AUTOLOAD:=$(call AutoProbe,slcan)
$(call AddDepends/can)
endef
define KernelPackage/can-slcan/description
CAN driver for several 'low cost' CAN interfaces that are attached
via serial lines or via USB-to-serial adapters using the LAWICEL
ASCII protocol.
endef
$(eval $(call KernelPackage,can-slcan))
define KernelPackage/can-usb-8dev
TITLE:=8 devices USB2CAN interface
KCONFIG:=CONFIG_CAN_8DEV_USB
FILES:=$(LINUX_DIR)/drivers/net/can/usb/usb_8dev.ko
AUTOLOAD:=$(call AutoProbe,usb_8dev)
$(call AddDepends/can,+kmod-usb-core)
endef
define KernelPackage/can-usb-8dev/description
This driver supports the USB2CAN interface
from 8 devices (http://www.8devices.com).
endef
$(eval $(call KernelPackage,can-usb-8dev))
define KernelPackage/can-usb-ems
TITLE:=EMS CPC-USB/ARM7 CAN/USB interface
KCONFIG:=CONFIG_CAN_EMS_USB
FILES:=$(LINUX_DIR)/drivers/net/can/usb/ems_usb.ko
AUTOLOAD:=$(call AutoProbe,ems_usb)
$(call AddDepends/can,+kmod-usb-core)
endef
define KernelPackage/can-usb-ems/description
This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
endef
$(eval $(call KernelPackage,can-usb-ems))
define KernelPackage/can-usb-esd
TITLE:=ESD USB/2 CAN/USB interface
KCONFIG:=CONFIG_CAN_ESD_USB2
FILES:=$(LINUX_DIR)/drivers/net/can/usb/esd_usb2.ko
AUTOLOAD:=$(call AutoProbe,esd_usb2)
$(call AddDepends/can,+kmod-usb-core)
endef
define KernelPackage/can-usb-esd/description
This driver supports the CAN-USB/2 interface
from esd electronic system design gmbh (http://www.esd.eu).
endef
$(eval $(call KernelPackage,can-usb-esd))
define KernelPackage/can-usb-kvaser
TITLE:=Kvaser CAN/USB interface
KCONFIG:=CONFIG_CAN_KVASER_USB
FILES:= \
$(LINUX_DIR)/drivers/net/can/usb/kvaser_usb.ko@lt4.19 \
$(LINUX_DIR)/drivers/net/can/usb/kvaser_usb/kvaser_usb.ko@ge4.19
AUTOLOAD:=$(call AutoProbe,kvaser_usb)
$(call AddDepends/can,+kmod-usb-core)
endef
define KernelPackage/can-usb-kvaser/description
This driver adds support for Kvaser CAN/USB devices like Kvaser
Leaf Light.
endef
$(eval $(call KernelPackage,can-usb-kvaser))
define KernelPackage/can-usb-peak
TITLE:=PEAK PCAN-USB/USB Pro interfaces
KCONFIG:=CONFIG_CAN_PEAK_USB
FILES:=$(LINUX_DIR)/drivers/net/can/usb/peak_usb/peak_usb.ko
AUTOLOAD:=$(call AutoProbe,peak_usb)
$(call AddDepends/can,+kmod-usb-core)
endef
define KernelPackage/can-usb-peak/description
This driver supports the PCAN-USB and PCAN-USB Pro adapters
from PEAK-System Technik (http://www.peak-system.com).
endef
$(eval $(call KernelPackage,can-usb-peak))
define KernelPackage/can-vcan
TITLE:=Virtual Local CAN Interface (vcan)
KCONFIG:=CONFIG_CAN_VCAN
FILES:=$(LINUX_DIR)/drivers/net/can/vcan.ko
AUTOLOAD:=$(call AutoProbe,vcan)
$(call AddDepends/can)
endef
define KernelPackage/can-vcan/description
Similar to the network loopback devices, vcan offers a
virtual local CAN interface.
endef
$(eval $(call KernelPackage,can-vcan))
define KernelPackage/can-xilinx-can
TITLE:=Xilinx CAN IP
KCONFIG:=CONFIG_CAN_XILINXCAN
FILES:=$(LINUX_DIR)/drivers/net/can/xilinx_can.ko
AUTOLOAD:=$(call AutoProbe,xilinx_can)
$(call AddDepends/can,@TARGET_zynq)
endef
define KernelPackage/can-xilinx-can/description
Xilinx CAN driver. This driver supports both
soft AXI CAN IP and Zynq CANPS IP.
endef
$(eval $(call KernelPackage,can-xilinx-can))