mvebu: new subtarget cortex A53
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
|
|
|
From patchwork Thu Sep 28 12:58:34 2017
|
|
|
|
Content-Type: text/plain; charset="utf-8"
|
|
|
|
MIME-Version: 1.0
|
|
|
|
Content-Transfer-Encoding: 7bit
|
|
|
|
Subject: [v2,
|
|
|
|
3/7] PCI: aardvark: set host and device to the same MAX payload size
|
|
|
|
X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
|
|
X-Patchwork-Id: 819587
|
|
|
|
Message-Id: <20170928125838.11887-4-thomas.petazzoni@free-electrons.com>
|
|
|
|
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
|
|
|
|
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
|
|
|
|
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement
|
|
|
|
<gregory.clement@free-electrons.com>,
|
|
|
|
Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>,
|
|
|
|
Yehuda Yitschak <yehuday@marvell.com>,
|
|
|
|
linux-arm-kernel@lists.infradead.org, Antoine Tenart
|
|
|
|
<antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?=
|
|
|
|
<miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>,
|
|
|
|
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
|
|
Date: Thu, 28 Sep 2017 14:58:34 +0200
|
|
|
|
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
|
|
List-Id: <linux-pci.vger.kernel.org>
|
|
|
|
|
|
|
|
From: Victor Gu <xigu@marvell.com>
|
|
|
|
|
|
|
|
Since the Aardvark does not implement a PCIe root bus, the Linux PCIe
|
|
|
|
subsystem will not align the MAX payload size between the host and the
|
|
|
|
device. This patch ensures that the host and device have the same MAX
|
|
|
|
payload size, fixing a number of problems with various PCIe devices.
|
|
|
|
|
|
|
|
This is part of fixing bug
|
|
|
|
https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was
|
|
|
|
reported as the user to be important to get a Intel 7260 mini-PCIe
|
|
|
|
WiFi card working.
|
|
|
|
|
|
|
|
Fixes: Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
|
|
|
|
Signed-off-by: Victor Gu <xigu@marvell.com>
|
|
|
|
Reviewed-by: Evan Wang <xswang@marvell.com>
|
|
|
|
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
|
|
|
|
[Thomas: tweak commit log.]
|
|
|
|
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
|
|
---
|
|
|
|
drivers/pci/host/pci-aardvark.c | 60 ++++++++++++++++++++++++++++++++++++++++-
|
|
|
|
1 file changed, 59 insertions(+), 1 deletion(-)
|
|
|
|
|
|
|
|
--- a/drivers/pci/host/pci-aardvark.c
|
|
|
|
+++ b/drivers/pci/host/pci-aardvark.c
|
2018-05-17 16:41:26 +00:00
|
|
|
@@ -30,9 +30,11 @@
|
mvebu: new subtarget cortex A53
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
|
|
|
#define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8
|
|
|
|
#define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4)
|
|
|
|
#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5
|
|
|
|
+#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ 0x2
|
|
|
|
#define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11)
|
|
|
|
#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12
|
2018-05-17 16:41:26 +00:00
|
|
|
#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2
|
mvebu: new subtarget cortex A53
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
|
|
|
+#define PCIE_CORE_MPS_UNIT_BYTE 128
|
|
|
|
#define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
|
|
|
|
#define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
|
|
|
|
#define PCIE_CORE_LINK_TRAINING BIT(5)
|
|
|
|
@@ -297,7 +299,8 @@ static void advk_pcie_setup_hw(struct ad
|
|
|
|
|
|
|
|
/* Set PCIe Device Control and Status 1 PF0 register */
|
|
|
|
reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
|
|
|
|
- (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
|
|
|
|
+ (PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ <<
|
|
|
|
+ PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
|
|
|
|
PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
|
2018-05-17 16:41:26 +00:00
|
|
|
(PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
|
|
|
|
PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
|
|
|
|
@@ -886,6 +889,58 @@ out_release_res:
|
mvebu: new subtarget cortex A53
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
+static int advk_pcie_find_smpss(struct pci_dev *dev, void *data)
|
|
|
|
+{
|
|
|
|
+ u8 *smpss = data;
|
|
|
|
+
|
|
|
|
+ if (!dev)
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+ if (!pci_is_pcie(dev))
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+ if (*smpss > dev->pcie_mpss)
|
|
|
|
+ *smpss = dev->pcie_mpss;
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int advk_pcie_bus_configure_mps(struct pci_dev *dev, void *data)
|
|
|
|
+{
|
|
|
|
+ int mps;
|
|
|
|
+
|
|
|
|
+ if (!dev)
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+ if (!pci_is_pcie(dev))
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+ mps = PCIE_CORE_MPS_UNIT_BYTE << *(u8 *)data;
|
|
|
|
+ pcie_set_mps(dev, mps);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void advk_pcie_configure_mps(struct pci_bus *bus, struct advk_pcie *pcie)
|
|
|
|
+{
|
|
|
|
+ u8 smpss = PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ;
|
|
|
|
+ u32 reg;
|
|
|
|
+
|
|
|
|
+ /* Find the minimal supported MAX payload size */
|
|
|
|
+ advk_pcie_find_smpss(bus->self, &smpss);
|
|
|
|
+ pci_walk_bus(bus, advk_pcie_find_smpss, &smpss);
|
|
|
|
+
|
|
|
|
+ /* Configure RC MAX payload size */
|
|
|
|
+ reg = advk_readl(pcie, PCIE_CORE_DEV_CTRL_STATS_REG);
|
|
|
|
+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
|
|
|
|
+ reg |= smpss << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT;
|
|
|
|
+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
|
|
|
|
+
|
|
|
|
+ /* Configure device MAX payload size */
|
|
|
|
+ advk_pcie_bus_configure_mps(bus->self, &smpss);
|
|
|
|
+ pci_walk_bus(bus, advk_pcie_bus_configure_mps, &smpss);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
static int advk_pcie_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct device *dev = &pdev->dev;
|
2018-10-02 09:12:52 +00:00
|
|
|
@@ -960,6 +1015,9 @@ static int advk_pcie_probe(struct platfo
|
mvebu: new subtarget cortex A53
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
|
|
|
list_for_each_entry(child, &bus->children, node)
|
|
|
|
pcie_bus_configure_settings(child);
|
|
|
|
|
|
|
|
+ /* Configure the MAX pay load size */
|
|
|
|
+ advk_pcie_configure_mps(bus, pcie);
|
|
|
|
+
|
|
|
|
pci_bus_add_devices(bus);
|
|
|
|
return 0;
|
|
|
|
}
|