openwrt/target/linux/lantiq/dts/VG3503J.dts

186 lines
3.4 KiB
Plaintext
Raw Normal View History

/dts-v1/;
/include/ "vr9.dtsi"
/ {
model = "VG3503J - BT OpenReach VDSL Modem";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-internet = &dsl;
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
ranges = <0 0 0x0 0x3ffffff>;
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x20000>;
};
partition@20000 {
label = "kernel";
reg = <0x20000 0x300000>;
};
partition@1a0000 {
label = "rootfs";
reg = <0x320000 0x420000>;
};
partition@740000 {
label = "btagent";
reg = <0x740000 0x80000>;
};
partition@7c0000 {
label = "pri_bfocus_cfg";
reg = <0x7c0000 0x10000>;
};
partition@7d0000 {
label = "sec_bfocus_cfg";
reg = <0x7d0000 0x10000>;
};
partition@7e0000 {
label = "sysconfig";
reg = <0x7e0000 0x10000>;
};
partition@7f0000 {
label = "misc_cfg";
reg = <0x7f0000 0x10000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led0", "gphy0 led1",
"gphy0 led2", "gphy1 led0",
"gphy1 led1", "gphy1 led2";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
};
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 6 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_red: power2 {
label = "vg3503j:red:power";
gpios = <&gpio 14 1>;
};
dsl: dsl {
label = "vg3503j:green:dsl";
gpios = <&gpio 19 1>;
};
power_green: power {
label = "vg3503j:green:power";
gpios = <&gpio 28 1>;
default-state = "keep";
};
};
};
&eth0 {
interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
lantiq,switch;
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,led1h = <0x70>;
lantiq,led1l = <0x00>;
lantiq,led2h = <0x00>;
lantiq,led2l = <0x03>;
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,led1h = <0x70>;
lantiq,led1l = <0x00>;
lantiq,led2h = <0x00>;
lantiq,led2l = <0x03>;
};
};
};