openwrt/target/linux/ramips/dts/mt7620n.dtsi

264 lines
4.7 KiB
Plaintext
Raw Normal View History

/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ralink,mtk7620n-soc";
cpus {
cpu@0 {
compatible = "mips,mips24KEc";
};
};
chosen {
bootargs = "console=ttyS0,57600";
};
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
sysc@0 {
compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
reg = <0x0 0x100>;
};
timer@100 {
compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
reg = <0x100 0x20>;
interrupt-parent = <&intc>;
interrupts = <1>;
};
watchdog@120 {
compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
reg = <0x120 0x10>;
resets = <&rstctrl 8>;
reset-names = "wdt";
interrupt-parent = <&intc>;
interrupts = <1>;
};
intc: intc@200 {
compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
resets = <&rstctrl 19>;
reset-names = "intc";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
memc@300 {
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
resets = <&rstctrl 20>;
reset-names = "mc";
interrupt-parent = <&intc>;
interrupts = <3>;
};
gpio0: gpio@600 {
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
reg = <0x600 0x34>;
resets = <&rstctrl 13>;
reset-names = "pio";
interrupt-parent = <&intc>;
interrupts = <6>;
gpio-controller;
#gpio-cells = <2>;
ralink,gpio-base = <0>;
ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
20 24 28 2c
30 34 ];
};
gpio1: gpio@638 {
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
reg = <0x638 0x24>;
interrupt-parent = <&intc>;
interrupts = <6>;
gpio-controller;
#gpio-cells = <2>;
ralink,gpio-base = <24>;
ralink,num-gpios = <16>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
status = "disabled";
};
gpio2: gpio@660 {
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
reg = <0x660 0x24>;
interrupt-parent = <&intc>;
interrupts = <6>;
gpio-controller;
#gpio-cells = <2>;
ralink,gpio-base = <40>;
ralink,num-gpios = <32>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
status = "disabled";
};
spi@b00 {
compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
reg = <0xb00 0x100>;
resets = <&rstctrl 18>;
reset-names = "spi";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>;
};
uartlite@c00 {
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
resets = <&rstctrl 19>;
reset-names = "uartl";
interrupt-parent = <&intc>;
interrupts = <12>;
reg-shift = <2>;
pinctrl-names = "default";
pinctrl-0 = <&uartlite_pins>;
};
systick@d00 {
compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
reg = <0xd00 0x10>;
resets = <&rstctrl 28>;
reset-names = "intc";
interrupt-parent = <&cpuintc>;
interrupts = <7>;
};
};
pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinctrl0 {
};
spi_pins: spi {
spi {
ralink,group = "spi";
ralink,function = "spi";
};
};
uartlite_pins: uartlite {
uart {
ralink,group = "uartlite";
ralink,function = "uartlite";
};
};
};
rstctrl: rstctrl {
compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
#reset-cells = <1>;
};
ubsphy {
compatible = "ralink,mt7620a-usbphy";
resets = <&rstctrl 22 &rstctrl 25>;
reset-names = "host", "device";
};
ethernet@10100000 {
compatible = "ralink,mt7620a-eth";
reg = <0x10100000 10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&cpuintc>;
interrupts = <5>;
resets = <&rstctrl 21 &rstctrl 23>;
reset-names = "fe", "esw";
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gsw@10110000 {
compatible = "ralink,mt7620a-gsw";
reg = <0x10110000 8000>;
interrupt-parent = <&intc>;
interrupts = <17>;
ralink,port4 = "gmac";
};
ehci@101c0000 {
compatible = "ralink,rt3xxx-ehci";
reg = <0x101c0000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <18>;
status = "disabled";
};
ohci@101c1000 {
compatible = "ralink,rt3xxx-ohci";
reg = <0x101c1000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <18>;
status = "disabled";
};
};