openwrt/target/linux/ramips/dts/AIR3GII.dts

/dts-v1/;

/include/ "rt5350.dtsi"

/ {
	compatible = "AIR3GII", "ralink,rt5350-soc";
	model = "AirLive Air3GII";

	palmbus@10000000 {
		sysc@0 {
			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
			ralink,uartmux = "gpio";
			ralink,wdtmux = <1>;
		};

		gpio0: gpio@600 {
			status = "okay";
		};

		spi@b00 {
			status = "okay";
			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "en25q32b";
				reg = <0 0>;
				linux,modalias = "m25p80", "en25q32b";
				spi-max-frequency = <10000000>;

				partition@0 {
					label = "u-boot";
					reg = <0x0 0x30000>;
					read-only;
				};

				partition@30000 {
					label = "u-boot-env";
					reg = <0x30000 0x10000>;
					read-only;
				};

				factory: partition@40000 {
					label = "factory";
					reg = <0x40000 0x10000>;
					read-only;
				};

				partition@50000 {
					label = "firmware";
					reg = <0x50000 0x3b0000>;
				};
			};
		};
	};

	ethernet@10100000 {
		status = "okay";
	};

	esw@10110000 {
		status = "okay";
		ralink,portmap = <0x2f>;
	};

	gpio-leds {
		compatible = "gpio-leds";
		wlan {
			label = "airlive:green:wlan";
			gpios = <&gpio0 8 0>;
		};
		mobile {
			label = "airlive:green:mobile";
			gpios = <&gpio0 9 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;
		wps {
			label = "wps";
			gpios = <&gpio0 7 1>;
			linux,code = <0x211>;
		};
	};

	wmac@10180000 {
		status = "okay";
	};
};