openwrt-owl

Go to file

Florian Fainelli fc432e4371 move the mii_ioctl to generic patches, fixes (#1802 ) SVN-Revision: 15045		2009-03-26 09:28:24 +00:00
docs	allow mac80211 devices to be configured to do 802.11s, requires iw	2009-02-26 14:53:03 +00:00
include	ooops, m4 is already part of the host tools	2009-03-25 20:17:33 +00:00
package	- fix mac assignment for broadcom vifs in bridging mode - thanks abramoff1 for spotting this - fix possible regression with different interface protocols - bump PKG_RELEASE	2009-03-25 19:13:15 +00:00
scripts	Add check for IXP42x A0 stepping.	2009-03-24 12:24:06 +00:00
target	move the mii_ioctl to generic patches, fixes (#1802 )	2009-03-26 09:28:24 +00:00
toolchain	fix uclibc subdir	2009-03-24 02:40:29 +00:00
tools	pkg-config: disable potentially recursive compat lookups which break on systems with gnome devel tools installed (thx, lubek)	2009-03-24 22:27:22 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target	2009-03-18 15:57:18 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	avoid implicit rules in even more places	2009-03-03 14:16:48 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	Add desktop and xfce feed to feeds.conf.default	2009-01-19 19:46:03 +00:00
rules.mk	move cflags default setting to target makefiles	2009-03-14 03:17:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org