openwrt-owl

Go to file

John Crispin fa1927839e lantiq: install uboot-envtools by default on BTHOMEHUBV3A The only way to access the u-boot console on the BTHOMEHUBV3A is by soldering a serial console onto some really tiny pads. To enable installation without soldering it would be helpful to be able to modify the uboot environment from within the ramdisk image used as part of the installation process. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 49253		2016-04-26 11:44:13 +00:00
config	build: don't add -fno-plt for ARC	2016-02-07 13:29:16 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	include: add a no dict version of lzma to new image build code	2016-04-26 11:43:24 +00:00
package	dnsmasq: run as dedicated UID/GID	2016-04-26 11:44:10 +00:00
scripts	scripts/getver.sh: Use 'git-rev-parse' to detect if tree lies in Git repository	2016-04-13 20:52:26 +00:00
target	lantiq: install uboot-envtools by default on BTHOMEHUBV3A	2016-04-26 11:44:13 +00:00
toolchain	toolchain/uClibc: enable UCLIBC_HAS_OBSOLETE_BSD_SIGNAL	2016-04-17 12:49:30 +00:00
tools	tools: firmware-utils: add region code support to mktplinkfw	2016-04-21 19:47:15 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	…
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
LICENSE	…
Makefile	Makefile: set timezone to UTC	2016-01-28 22:42:18 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
feeds.conf.default	feeds.conf.default: remove the commented ancient feeds	2016-04-20 17:19:08 +00:00
rules.mk	build: disable the use of -iremap for UML (#21851 )	2016-02-13 22:23:32 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org