mirror of https://github.com/hak5/openwrt-owl.git
230 lines
6.6 KiB
Diff
230 lines
6.6 KiB
Diff
--- a/arch/arm/mach-at91/Kconfig
|
|
+++ b/arch/arm/mach-at91/Kconfig
|
|
@@ -151,6 +151,12 @@ config MACH_TT9200
|
|
help
|
|
Select this if you are using Toptech's TT9200 board.
|
|
|
|
+config MACH_VLINK
|
|
+ bool "Figment Design Labs VersaLink"
|
|
+ depends on ARCH_AT91RM9200
|
|
+ help
|
|
+ Select this if you are using FDL's VersaLink board
|
|
+
|
|
endif
|
|
|
|
# ----------------------------------------------------------
|
|
--- a/arch/arm/mach-at91/Makefile
|
|
+++ b/arch/arm/mach-at91/Makefile
|
|
@@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_KB9200) += board-kb920
|
|
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
|
|
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
|
|
obj-$(CONFIG_MACH_CHUB) += board-chub.o
|
|
+obj-$(CONFIG_MACH_VLINK) += board-vlink.o
|
|
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
|
|
obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o
|
|
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-at91/board-vlink.c
|
|
@@ -0,0 +1,201 @@
|
|
+/*
|
|
+ * linux/arch/arm/mach-at91/board-vlink.c
|
|
+ *
|
|
+ * Copyright (C) 2005 SAN People
|
|
+ * Copyright (C) 2006,2007 Guthrie Consulting
|
|
+ *
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/mtd/physmap.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/mach/irq.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+#include <asm/arch/at91rm9200_mc.h>
|
|
+
|
|
+#include "generic.h"
|
|
+
|
|
+
|
|
+static void __init vlink_map_io(void)
|
|
+{
|
|
+ /* Initialize processor: 18.432 MHz crystal */
|
|
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
|
|
+
|
|
+ /* Setup the LEDs */
|
|
+ at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15);
|
|
+
|
|
+ /* Setup serial ports */
|
|
+
|
|
+ /* DBGU on ttyS0. (RX and TX only) */
|
|
+ at91_register_uart(0, 0, 0);
|
|
+
|
|
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DSR, DTR, DCD, RI) */
|
|
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS
|
|
+ | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR
|
|
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
|
|
+
|
|
+ /* USART0 on ttys2. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
|
|
+ at91_register_uart(AT91RM9200_ID_US0, 2, ATMEL_UART_CTS
|
|
+ | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
|
|
+
|
|
+ /* USART3 on ttyS3. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
|
|
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS
|
|
+ | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
|
|
+
|
|
+ /* USART2 on ttyS4. (Rx and Tx only) */
|
|
+ at91_register_uart(AT91RM9200_ID_US2, 4, 0);
|
|
+
|
|
+ /* Console on ttyS0 (ie DBGU) */
|
|
+ at91_set_serial_console(0);
|
|
+}
|
|
+
|
|
+static void __init vlink_init_irq(void)
|
|
+{
|
|
+ at91rm9200_init_interrupts(NULL);
|
|
+}
|
|
+
|
|
+static struct at91_eth_data __initdata vlink_eth_data = {
|
|
+ .phy_irq_pin = AT91_PIN_PC4,
|
|
+ .is_rmii = 1,
|
|
+};
|
|
+
|
|
+static struct at91_usbh_data __initdata vlink_usbh_data = {
|
|
+ .ports = 1,
|
|
+};
|
|
+
|
|
+/*
|
|
+static struct at91_udc_data __initdata vlink_udc_data = {
|
|
+ .vbus_pin = AT91_PIN_PD4,
|
|
+ .pullup_pin = AT91_PIN_PD5,
|
|
+};
|
|
+*/
|
|
+
|
|
+static struct at91_mmc_data __initdata vlink_mmc_data = {
|
|
+// .det_pin = AT91_PIN_PB27,
|
|
+ .slot_b = 0,
|
|
+ .wire4 = 1,
|
|
+// .wp_pin = AT91_PIN_PA17,
|
|
+};
|
|
+
|
|
+static struct spi_board_info vlink_spi_devices[] = {
|
|
+ { /* DataFlash chip */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ },
|
|
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
|
+ { /* DataFlash card */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 3,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ },
|
|
+#endif
|
|
+};
|
|
+
|
|
+/*static struct at91_gpio_led vlink_leds[] = {
|
|
+ {
|
|
+ .name = "led0",
|
|
+ .gpio = AT91_PIN_PC14,
|
|
+ .trigger = "heartbeat",
|
|
+ },
|
|
+ {
|
|
+ .name = "led1",
|
|
+ .gpio = AT91_PIN_PC15,
|
|
+ .trigger = "timer",
|
|
+ }
|
|
+};
|
|
+*/
|
|
+
|
|
+static void __init vlink_board_init(void)
|
|
+{
|
|
+ /* Serial */
|
|
+ at91_add_device_serial();
|
|
+ /* Ethernet */
|
|
+ at91_add_device_eth(&vlink_eth_data);
|
|
+ /* USB Host */
|
|
+ at91_add_device_usbh(&vlink_usbh_data);
|
|
+ /* USB Device */
|
|
+// at91_add_device_udc(&vlink_udc_data);
|
|
+// at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
|
|
+ /* I2C */
|
|
+// at91_add_device_i2c();
|
|
+ /* SPI */
|
|
+ at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
|
|
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
|
+ /* DataFlash card */
|
|
+// at91_set_gpio_output(AT91_PIN_PB22, 0);
|
|
+#else
|
|
+ /* MMC */
|
|
+// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
|
|
+ at91_add_device_mmc(0, &vlink_mmc_data);
|
|
+#endif
|
|
+ /* LEDs */
|
|
+// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
|
|
+
|
|
+/* Other LED's */
|
|
+ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1
|
|
+ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1
|
|
+ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
|
|
+ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
|
|
+ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
|
|
+ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
|
|
+
|
|
+/* SIM Cards */
|
|
+ at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3
|
|
+ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
|
|
+ at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
|
|
+
|
|
+/* GSM Module Control */
|
|
+ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
|
|
+
|
|
+/* Test jig presence detection */
|
|
+ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
|
|
+
|
|
+/* Power indicator */
|
|
+ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
|
|
+
|
|
+/* USB Device control */
|
|
+ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
|
|
+ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
|
|
+ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
|
|
+
|
|
+}
|
|
+
|
|
+MACHINE_START(VLINK, "FDL VersaLink")
|
|
+ /* Maintainer: Guthrie Consulting */
|
|
+ .phys_io = AT91_BASE_SYS,
|
|
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
|
+ .boot_params = AT91_SDRAM_BASE + 0x100,
|
|
+ .timer = &at91rm9200_timer,
|
|
+ .map_io = vlink_map_io,
|
|
+ .init_irq = vlink_init_irq,
|
|
+ .init_machine = vlink_board_init,
|
|
+MACHINE_END
|