hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
26,380 Commits
4 Branches
8 Tags
167 MiB
C 66.6%
Makefile 16.7%
Shell 8%
Roff 2.7%
Perl 2.1%
Other 3.8%
 
 
 
 
 
 
Go to file
Gabor Juhos f85231257e ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards 
On recent TL-WDR4300 boards the external LNAs of the 2.4GHz
interface are connected to GPIO lines. Because these GPIO
lines are disabled by default, the RX sensitivity of the
device is quite bad.

Setup the GPIOs of the external LNAs to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39392
 		2014-01-24 17:40:17 +00:00
config config: lxc: enable KERNEL_POSIX_MQUEUE 2014-01-24 13:49:39 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include target: replace 6relayd with odhcpd by default 2014-01-17 13:59:55 +00:00
package uboot-envtools: add support for wndr3700 2014-01-24 00:07:48 +00:00
scripts scripts/kconfig.pl: Indicate which file we couldn't open 2014-01-19 17:27:04 +00:00
target ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards 2014-01-24 17:40:17 +00:00
toolchain upgrade the Linaro binutils to 2.24-2013.12 2014-01-07 15:03:55 +00:00
tools ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved 2014-01-12 17:26:24 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in move menuconfig options into separate files 2013-11-22 14:30:40 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: it is no longer necessary to call make target/linux/clean as part of make clean 2012-12-02 15:26:28 +00:00
README build: BSD compile fixes 2013-03-07 17:32:29 +00:00
feeds.conf.default feeds.conf.default: switch packages feed to git (#13818) 2013-07-05 02:04:40 +00:00
rules.mk FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options. 2013-11-29 10:59:51 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org