Daniel Dickinson f83c5938d2 bcm63xx: Move the OpenWrt rootfs length field ... Dual image capable CFEs store an image sequence at the same place as currently OpenWrt stores the actual rootfs length, so it will get overwritten when flashing through such a CFE. To prevent this from happening, move the rootfs length field to the next four bytes, thus completely using the reserved1 field. Since the reserved1 field is now completely in use, it does not make sense to allow it to be set from the imagetag utility, so remove the option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26680		2011-04-15 12:18:25 +00:00
..
base-files	add support for 'MAGIC' bcm6348-based board	2011-02-19 12:44:27 +00:00
files/arch/mips/include/asm/mach-bcm63xx	bcm63xx: Move the OpenWrt rootfs length field	2011-04-15 12:18:25 +00:00
image	add support for HW553 bcm6358-based boards (#8844)	2011-02-19 15:44:06 +00:00
patches-2.6.35	add support for HW553 bcm6358-based boards (#8844)	2011-02-19 15:44:06 +00:00
patches-2.6.37	bcm63xx: Move the OpenWrt rootfs length field	2011-04-15 12:18:25 +00:00
profiles	Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.	2010-12-08 00:40:31 +00:00
Makefile	kernel: Update to version 2.6.37.6	2011-04-03 13:59:07 +00:00
base-files.mk	bcm63xx: Add defconfigs.	2010-11-28 22:04:19 +00:00
config-2.6.35	restore kernel oldconfig	2010-10-17 14:09:24 +00:00
config-2.6.37	add support for 2.6.37, patches from KanjiMonster	2011-02-20 19:59:22 +00:00
modules.mk	massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950	2010-07-12 14:06:13 +00:00