openwrt-owl/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch

128 lines
3.7 KiB
Diff

--- a/.local-symbols
+++ b/.local-symbols
@@ -344,40 +344,3 @@ USB_CDC_PHONET=
USB_IPHETH=
USB_SIERRA_NET=
USB_VL600=
-SSB_POSSIBLE=
-SSB=
-SSB_SPROM=
-SSB_BLOCKIO=
-SSB_PCIHOST_POSSIBLE=
-SSB_PCIHOST=
-SSB_B43_PCI_BRIDGE=
-SSB_PCMCIAHOST_POSSIBLE=
-SSB_PCMCIAHOST=
-SSB_SDIOHOST_POSSIBLE=
-SSB_SDIOHOST=
-SSB_SILENT=
-SSB_DEBUG=
-SSB_SERIAL=
-SSB_DRIVER_PCICORE_POSSIBLE=
-SSB_DRIVER_PCICORE=
-SSB_PCICORE_HOSTMODE=
-SSB_DRIVER_MIPS=
-SSB_SFLASH=
-SSB_EMBEDDED=
-SSB_DRIVER_EXTIF=
-SSB_DRIVER_GIGE=
-SSB_DRIVER_GPIO=
-BCMA_POSSIBLE=
-BCMA=
-BCMA_BLOCKIO=
-BCMA_HOST_PCI_POSSIBLE=
-BCMA_HOST_PCI=
-BCMA_DRIVER_PCI_HOSTMODE=
-BCMA_HOST_SOC=
-BCMA_DRIVER_PCI=
-BCMA_DRIVER_MIPS=
-BCMA_SFLASH=
-BCMA_NFLASH=
-BCMA_DRIVER_GMAC_CMN=
-BCMA_DRIVER_GPIO=
-BCMA_DEBUG=
--- a/Makefile.kernel
+++ b/Makefile.kernel
@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
obj-$(CPTCFG_WLAN) += drivers/net/wireless/
#obj-$(CPTCFG_BT) += net/bluetooth/
#obj-$(CPTCFG_BT) += drivers/bluetooth/
-obj-$(CPTCFG_SSB) += drivers/ssb/
-obj-$(CPTCFG_BCMA) += drivers/bcma/
#obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
#obj-$(CPTCFG_NFC) += net/nfc/
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2866,7 +2866,7 @@ static struct ssb_device *b43_ssb_gpio_d
{
struct ssb_bus *bus = dev->dev->sdev->bus;
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
#else
return bus->chipco.dev;
@@ -4907,7 +4907,7 @@ static int b43_wireless_core_init(struct
}
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
-#if defined(CPTCFG_B43_SSB) && defined(CPTCFG_SSB_DRIVER_PCICORE)
+#if defined(CPTCFG_B43_SSB) && defined(CONFIG_SSB_DRIVER_PCICORE)
if (dev->dev->bus_type == B43_BUS_SSB &&
dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1937,7 +1937,7 @@ static int b43legacy_gpio_init(struct b4
if (dev->dev->id.revision >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
@@ -1956,7 +1956,7 @@ static void b43legacy_gpio_cleanup(struc
struct ssb_bus *bus = dev->dev->bus;
struct ssb_device *gpiodev, *pcidev = NULL;
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
--- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile
+++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile
@@ -43,6 +43,6 @@ brcmsmac-y := \
brcms_trace_events.o \
debug.o
-brcmsmac-$(CPTCFG_BCMA_DRIVER_GPIO) += led.o
+brcmsmac-$(CONFIG_BCMA_DRIVER_GPIO) += led.o
obj-$(CPTCFG_BRCMSMAC) += brcmsmac.o
--- a/drivers/net/wireless/brcm80211/brcmsmac/led.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/led.h
@@ -22,7 +22,7 @@ struct brcms_led {
bool active_low;
};
-#ifdef CPTCFG_BCMA_DRIVER_GPIO
+#ifdef CONFIG_BCMA_DRIVER_GPIO
void brcms_led_unregister(struct brcms_info *wl);
int brcms_led_register(struct brcms_info *wl);
#else
--- a/Kconfig.sources
+++ b/Kconfig.sources
@@ -9,9 +9,6 @@ source "$BACKPORT_DIR/drivers/net/wirele
#source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
-source "$BACKPORT_DIR/drivers/ssb/Kconfig"
-source "$BACKPORT_DIR/drivers/bcma/Kconfig"
-
#source "$BACKPORT_DIR/net/nfc/Kconfig"
#source "$BACKPORT_DIR/drivers/media/Kconfig"