openwrt-owl/target/linux/ar71xx/patches-3.10/631-MIPS-ath79-add-BHU-BXU2...

40 lines
1.4 KiB
Diff

--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -829,6 +829,16 @@ config ATH79_MACH_CARAMBOLA2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_BHU_BXU2000N2_A
+ bool "BHU BXU2000n-2 rev. A support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
endmenu
config SOC_AR71XX
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_ATH79_MACH_AP83) += mach-a
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -33,6 +33,7 @@ enum ath79_mach_type {
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */