Go to file
Felix Fietkau ecd169b2c6 broadcom-wl: disable mips16 support, fixes build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41540
2014-07-07 08:29:35 +00:00
config config/Config-images.in: enable zlib as the default ubi compression 2014-06-24 18:14:05 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include kernel: update 3.14 to 3.14.10 2014-07-06 18:10:49 +00:00
package broadcom-wl: disable mips16 support, fixes build 2014-07-07 08:29:35 +00:00
scripts scripts/abs2rel.pl: remove, it is unused 2014-07-04 12:11:40 +00:00
target kernel: do not build kernel modules by default 2014-07-06 22:34:24 +00:00
toolchain musl: add sgidefs.h 2014-06-29 22:25:51 +00:00
tools b43-tools: update to version 019 2014-07-02 20:52:50 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in move menuconfig options into separate files 2013-11-22 14:30:40 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: remove duplicate variable definitions 2014-03-21 15:54:11 +00:00
README build: BSD compile fixes 2013-03-07 17:32:29 +00:00
feeds.conf.default feeds.conf.default: add management feed 2014-06-12 15:08:08 +00:00
rules.mk partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk" 2014-03-22 19:52:48 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org