openwrt-owl/target/linux/ar71xx/patches-3.10/626-MIPS-ath79-add-MyNet-60...

40 lines
1.5 KiB
Diff

--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -762,6 +762,16 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+config ATH79_MACH_MYNET_N600
+ bool "WD My Net N600 board support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
config ATH79_MACH_ZCN_1523H
bool "Zcomax ZCN-1523H support"
select SOC_AR724X
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -53,6 +53,7 @@ enum ath79_mach_type {
ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
ATH79_MACH_MR600, /* OpenMesh MR600 */
+ ATH79_MACH_MYNET_N600, /* WD My Net N600 */
ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
+obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o