mirror of https://github.com/hak5/openwrt-owl.git
105 lines
4.8 KiB
Plaintext
105 lines
4.8 KiB
Plaintext
Linux version 2.4.30 (nthill@debian) (gcc version 3.4.4) #2 Sat Aug 13 01:30:32 CEST 2005
|
|
BIOS-provided physical RAM map:
|
|
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
|
|
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
|
|
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
|
|
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
|
|
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
|
|
128MB LOWMEM available.
|
|
On node 0 totalpages: 32768
|
|
zone(0): 4096 pages.
|
|
zone(1): 28672 pages.
|
|
zone(2): 0 pages.
|
|
DMI not present.
|
|
Kernel command line: blkmtd_device=/dev/hda2 root=/dev/mtdblock0 init=/etc/preinit noinitrd console=ttyS0,19200n8
|
|
Initializing CPU#0
|
|
Detected 266.650 MHz processor.
|
|
Calibrating delay loop... 532.48 BogoMIPS
|
|
Memory: 127284k/131072k available (1238k kernel code, 3400k reserved, 248k data, 80k init, 0k highmem)
|
|
Checking if this processor honours the WP bit even in supervisor mode... Ok.
|
|
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
|
|
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
|
|
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
|
|
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
|
|
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
|
|
CPU: After generic, caps: 00808131 00818131 00000000 00000001
|
|
CPU: Common caps: 00808131 00818131 00000000 00000001
|
|
CPU: NSC Unknown stepping 01
|
|
Checking 'hlt' instruction... OK.
|
|
POSIX conformance testing by UNIFIX
|
|
PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=0
|
|
PCI: Using configuration type 1
|
|
PCI: Probing PCI hardware
|
|
PCI: Probing PCI hardware (bus 00)
|
|
Linux NET4.0 for Linux 2.4
|
|
Based upon Swansea University Computer Society NET3.039
|
|
Initializing RT netlink socket
|
|
Starting kswapd
|
|
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
|
|
devfs: boot_options: 0x1
|
|
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
|
|
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
|
|
pty: 256 Unix98 ptys configured
|
|
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
|
|
ttyS00 at 0x03f8 (irq = 4) is a 16550A
|
|
ttyS01 at 0x02f8 (irq = 3) is a 16550A
|
|
Software Watchdog Timer: 0.05, timer margin: 60 sec
|
|
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
|
|
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
|
|
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
|
|
SC1200: IDE controller at PCI slot 00:12.2
|
|
SC1200: chipset revision 1
|
|
SC1200: not 100% native mode: will probe irqs later
|
|
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
|
|
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
|
|
hda: Transcend 256M, CFA DISK drive
|
|
hdb: HTS424030M9AT00, ATA DISK drive
|
|
SC1200: set xfer mode failure
|
|
hdb: sc1200_set_xfer_mode(UDMA 2)
|
|
blk: queue c02c421c, I/O limit 4095Mb (mask 0xffffffff)
|
|
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
|
|
hda: attached ide-disk driver.
|
|
hda: 500736 sectors (256 MB) w/2KiB Cache, CHS=978/16/32
|
|
hdb: attached ide-disk driver.
|
|
hdb: host protected area => 1
|
|
hdb: 58605120 sectors (30006 MB) w/1739KiB Cache, CHS=3648/255/63, UDMA(33)
|
|
Partition check:
|
|
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
|
|
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3
|
|
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
|
|
blkmtd: mtd0: [/dev/hda2] erase_size = 128KiB
|
|
blkmtd: version 1.10
|
|
Initializing Cryptographic API
|
|
NET4: Linux TCP/IP 1.0 for NET4.0
|
|
IP Protocols: ICMP, UDP, TCP, IGMP
|
|
IP: routing cache hash table of 1024 buckets, 8Kbytes
|
|
TCP: Hash tables configured (established 8192 bind 16384)
|
|
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack
|
|
ip_tables: (C) 2000-2002 Netfilter core team
|
|
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
|
|
NET4: Ethernet Bridge 008 for NET4.0
|
|
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
|
|
All bugs added by David S. Miller <davem@redhat.com>
|
|
VFS: Mounted root (jffs2 filesystem) readonly.
|
|
Mounted devfs on /dev
|
|
Freeing unused kernel memory: 80k freed
|
|
jffs2.bbc: SIZE compression mode activated.
|
|
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
|
|
originally by Donald Becker <becker@scyld.com>
|
|
http://www.scyld.com/network/natsemi.html
|
|
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
|
|
eth0: NatSemi DP8381[56] at 0xc88ab000, 00:00:24:c2:45:7c, IRQ 10.
|
|
eth1: NatSemi DP8381[56] at 0xc88ad000, 00:00:24:c2:45:7d, IRQ 10.
|
|
eth2: NatSemi DP8381[56] at 0xc88af000, 00:00:24:c2:45:7e, IRQ 10.
|
|
device eth0 entered promiscuous mode
|
|
eth0: link up.
|
|
eth0: Setting full-duplex based on negotiated link capability.
|
|
eth0: Promiscuous mode enabled.
|
|
eth0: Promiscuous mode enabled.
|
|
eth0: Promiscuous mode enabled.
|
|
eth0: Promiscuous mode enabled.
|
|
eth0: Promiscuous mode enabled.
|
|
br0: port 1(eth0) entering learning state
|
|
br0: port 1(eth0) entering forwarding state
|
|
br0: topology change detected, propagating
|