Go to file
Hauke Mehrtens e626930ea6 add ssb dependency to b44
SVN-Revision: 14774
2009-03-07 15:52:13 +00:00
docs allow mac80211 devices to be configured to do 802.11s, requires iw 2009-02-26 14:53:03 +00:00
include allow uml to access host.mk at DUMP time 2009-03-03 15:45:15 +00:00
package add ssb dependency to b44 2009-03-07 15:52:13 +00:00
scripts fix a package metadata parsing bug 2009-03-03 14:03:37 +00:00
target Switch back to the previous set resolution when unblanking the screen. 2009-03-06 21:25:25 +00:00
toolchain fix powerpc build (works for 2.4 and 2.6) 2009-03-01 11:04:08 +00:00
tools add dependency (needed for parallel build) 2009-03-01 09:47:05 +00:00
.gitignore add feeds.conf to .gitignore 2008-09-23 11:06:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add the possibility to put the rootfs to another location (usefull to specify one dedicated NFS export share regardless where in the compute farm the build is done) 2009-02-20 10:38:08 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile avoid implicit rules in even more places 2009-03-03 14:16:48 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default Add desktop and xfce feed to feeds.conf.default 2009-01-19 19:46:03 +00:00
rules.mk replace a few unnecessary $(shell) calls 2009-03-03 14:55:53 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org