openwrt-owl

Go to file

Daniel Dickinson e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. SVN-Revision: 24302		2010-12-07 15:15:41 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	re-enable the libtool PKG_BUILD_DEPENDS for PKG_FIXUP and emit a deprecation warning. Packages must specify PKG_BUILD_DEPENDS:=libtool	2010-12-04 19:56:47 +00:00
package	package/cyassl: update to version 1.6.5	2010-12-07 12:21:41 +00:00
scripts	scripts/feeds: support checking out git trees with different branches	2010-12-06 16:57:25 +00:00
target	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
toolchain	preliminary support for Freescale MPC85xx based boards	2010-12-05 11:38:59 +00:00
tools	tools/automake: add symbolic links upto version 1.11.1	2010-12-06 17:38:09 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	…
Config.in	remove 2.6.25 support	2010-11-22 13:43:32 +00:00
LICENSE	…
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	remove an obsolete comment for the flock template	2010-10-31 15:36:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org