openwrt-owl

Go to file

Felix Fietkau e4a6acf9b8 enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733 ) SVN-Revision: 20551		2010-03-28 18:57:42 +00:00
docs	Add documentation for passphrase option.	2009-09-24 21:50:17 +00:00
include	kernel: update to 2.6.32.10	2010-03-26 10:45:25 +00:00
package	madwifi: fix the tx rate display in iwconfig (#6925 )	2010-03-28 18:38:38 +00:00
scripts	rework board detection	2010-03-18 23:35:21 +00:00
target	enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733 )	2010-03-28 18:57:42 +00:00
toolchain	uClibc: fix free-after-use bug in __dns_lookup (closes #6886 )	2010-03-23 08:12:24 +00:00
tools	move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it	2010-03-28 18:11:06 +00:00
.gitignore	.gitignore: ignore vim swap files	2009-12-16 13:39:52 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	remove support for DEBUG_DIR, it has lost its purpose since STAGING_DIR_ROOT was added	2010-02-24 23:43:05 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	add a src-link example to feeds.conf.default	2009-12-13 20:46:30 +00:00
rules.mk	add an arch suffix for handling different variants of arm/mips for the toolchain/target directories	2010-03-14 18:24:05 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org