Go to file
Gabor Juhos dffd45dc61 generic: rtl8366: add common rtl8366_sw_get_port_mib function
SVN-Revision: 22200
2010-07-15 13:05:36 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include partially revert [22145], keep LINUX_KMOD_SUFFIX, needed to build external modules in ./packages 2010-07-12 16:01:13 +00:00
package madwifi: in-flash macs for mach-eap7660d 2010-07-15 07:37:00 +00:00
scripts Revert r22094 and r22095 2010-07-08 16:15:57 +00:00
target generic: rtl8366: add common rtl8366_sw_get_port_mib function 2010-07-15 13:05:36 +00:00
toolchain remove support for building kernel headers with old kernels 2010-06-26 20:44:48 +00:00
tools tools/firmware-utils: enhance mktplinkfw utility 2010-07-13 16:51:59 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in enable ipv6 support for packages by default 2010-07-13 18:45:29 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
feeds.conf.default add a src-link example to feeds.conf.default 2009-12-13 20:46:30 +00:00
rules.mk fix path to libgcc.a in LIBGCC_S 2010-03-30 04:04:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org