openwrt-owl/target/linux/lantiq/image/ARV752DPW22.dts

/dts-v1/;

/include/ "danube.dtsi"

/ {
	chosen {
		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
	};

	memory@0 {
		reg = <0x0 0x4000000>;
	};

	fpi@10000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		localbus@0 {
			#address-cells = <2>;
			#size-cells = <1>;
			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
				1 0 0x4000000 0x4000010>; /* addsel1 */
			compatible = "lantiq,localbus", "simple-bus";

			nor-boot@0 {
				compatible = "lantiq,nor";
				bank-width = <2>;
				reg = <0 0x0 0x800000>;
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
					label = "uboot";
					reg = <0x00000 0x10000>;
					read-only;
				};

				partition@10000 {
					label = "uboot_env";
					reg = <0x10000 0x10000>;
				};

				partition@20000 {
					label = "linux";
					reg = <0x20000 0x7d0000>;
				};

				partition@7f0000 {
					label = "boardconfig";
					reg = <0x7f0000 0x10000>;
					read-only;
				};
			};
			gpiomm: gpiomm@4000000 {
				compatible = "lantiq,gpio-mm";
				reg = <1 0x0 0x10 >;
				#address-cells = <1>;
				#size-cells = <1>;
				#gpio-cells = <2>;
				gpio-controller;
				lantiq,shadow = <2>;
			};
		};

		gpio: pinmux@E100B10 {
			compatible = "lantiq,pinctrl-xway";
			pinctrl-names = "default";
			pinctrl-0 = <&state_default>;

			#gpio-cells = <2>;
			gpio-controller;
			reg = <0xE100B10 0xA0>;

			state_default: pinmux {
				exin {
					lantiq,groups = "exin1";
					lantiq,function = "exin";
				};
				pci {
					lantiq,groups = "gnt1", "gnt2", "req1", "req2";
					lantiq,function = "pci";
				};
				conf_out {
					lantiq,pins = "io3", "io5", "io6", "io8", /* leds */
							"io21"; /* pci-rst */
					lantiq,open-drain;
					lantiq,pull = <0>;
				};
			};
		};

		adsl: dsl@E116000 {
			compatible = "lantiq,dsl-xway";
			interrupt-parent = <&icu0>;
			interrupts = <63 96>;
		};

		etop@E180000 {
			compatible = "lantiq,etop-xway";
			reg = <0xE180000 0x40000>;
			interrupt-parent = <&icu0>;
			interrupts = <73 78>;
			phy-mode = "rmii";
			mac-address = [ 00 11 22 33 44 55 ];
		};

		pci@E105400 {
			lantiq,bus-clock = <33333333>;
			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
			interrupt-map = <
                                0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
			>;
			lantiq,external-clock;
			gpio-reset = <&gpio 21 0>;
			req-mask = <0x3>;
		};

	};

	gpio-keys {
		compatible = "gpio-keys1";
		reset {
			label = "Reset";
			gpios = <&gpio 29 1>;
			gpio-key,wakeup;
			linux,code = <0x100>;
		};
	};
	gpio-leds {
		compatible = "gpio-leds";
		power0 {
			label = "power0";
			gpios = <&gpio 3 1>;
			default-state = "on";
		};
		message {
			label = "message";
			gpios = <&gpio 5 1>;
			default-state = "on";
		};
		power1 {
			label = "power1";
			gpios = <&gpio 6 1>;
			default-state = "on";
		};
		voice1 {
			label = "voice1";
			gpios = <&gpio 8 1>;
			default-state = "on";
		};
		microphone {
			label = "microphone";
			gpios = <&gpiomm 3 1>;
			default-state = "on";
		};
		wifi {
			label = "wifi";
			gpios = <&gpiomm 4 1>;
			default-state = "on";
		};
		fxs1 {
			label = "fxs1";
			gpios = <&gpiomm 5 1>;
			default-state = "on";
		};
		fx2 {
			label = "fxs2";
			gpios = <&gpiomm 6 1>;
			default-state = "on";
		};
		fxo {
			label = "fxo";
			gpios = <&gpiomm 7 1>;
			default-state = "on";
		};
		internet {
			label = "internet";
			gpios = <&gpiomm 8 1>;
			default-state = "on";
		};
		voice2 {
			label = "voice2";
			gpios = <&gpiomm 9 1>;
			default-state = "on";
		};
		eth1 {
			 label = "eth1";
			 gpios = <&gpiomm 11 1>;
			 default-state = "on";
		};
		eth2 {
			label = "eth2";
			gpios = <&gpiomm 12 1>;
			default-state = "on";
		};
		eth3 {
			label = "eth3";
			gpios = <&gpiomm 13 1>;
			default-state = "on";
		};
		eth4 {
			label = "eth4";
			gpios = <&gpiomm 14 1>;
			default-state = "on";
		};
	};
};