openwrt-owl

Go to file

Jo-Philipp Wich d9345bc5bf kernel: fix crashlog on x86/64 The bootmem area reserved for crashlog might be smaller than CRASHLOG_OFFSET bytes, leading to an integer underflow when calculating the memory address in crashlog_set_addr() which subsequently causes the kernel to crash when attempting to vmap() the crashlog pages. Change the logic to only consider the offset when the size of the used memory area is sufficient. Signed-off-by: Jo-Philipp Wich <jo@mein.io>		2016-08-15 13:21:01 +02:00
config	apm821xx: use lzma compression for the initramfs images	2016-07-25 10:38:11 +02:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	kernel: check SOURCE_DATE_EPOCH before setting KBUILD_BUILD_TIMESTAMP	2016-08-13 15:49:26 +02:00
package	base-files: set pi_ifname in board.d case to fix deconfig	2016-08-14 23:10:17 +02:00
scripts	kernel: add plan 9 fs package	2016-08-11 10:45:33 +02:00
target	kernel: fix crashlog on x86/64	2016-08-15 13:21:01 +02:00
toolchain	toolchain/uClibc: add missing config symbol	2016-08-15 01:49:18 +02:00
tools	tools: make_ext4fs: switch to LEDE git mirror	2016-08-14 22:34:47 +02:00
.gitattributes	…
.gitignore	…
BSDmakefile	…
Config.in	branding: add LEDE branding	2016-03-24 22:40:13 +01:00
LICENSE	…
Makefile	build: move merged package directory from bin/ to staging_dir	2016-08-03 12:22:18 +02:00
README	README: Update project README	2016-05-12 03:29:36 +02:00
feeds.conf.default	feeds: switch from github to lede-project.org mirrors	2016-08-01 22:34:18 +02:00
rules.mk	build: add checksum target	2016-08-01 18:11:21 +02:00

README

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org