openwrt-owl/target/linux/lantiq
Martin Blumenstingl c6164d9610 lantiq: fix building AVM/EVA sysupgrade images on NOR devices
Device/AVM unconditionally inherits Device/NAND, which changes the
sysupgrade image to sysupgrade-tar (instead of a "raw" sysupgrade image
as used in the Device/Default template).
This moves the Device/NAND call to the FRITZ3370 device definition, as
this is the only AVM/EVA device that uses NAND.
Additionally we have to define the IMAGE_SIZE for the AVM/EVA NOR
devices to ensure that the images are not discarded.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-08-22 07:43:11 +02:00
..
base-files lantiq: generate switch configuration for BTHOMEHUBV2B. 2016-08-20 05:35:42 +02:00
dts lantiq/xrx200-net: add interrupt for second DMA TX channel to vr9.dtsi 2016-08-15 15:32:36 +02:00
files/firmware/lantiq move GPHY FW blobs to non versioned folder 2013-03-14 18:42:21 +00:00
image lantiq: fix building AVM/EVA sysupgrade images on NOR devices 2016-08-22 07:43:11 +02:00
patches-4.4 lantiq/xrx200-net: Add support for eth0 as WAN interface 2016-08-15 21:52:04 +02:00
xrx200 lantiq: add cpu temperatur sensor driver for xrx200 2016-08-03 15:30:13 +02:00
xway build: remove MIPS dsp/dsp2 CPU_SUBTYPE 2016-08-03 14:56:45 +02:00
xway_legacy build: remove MIPS dsp/dsp2 CPU_SUBTYPE 2016-08-03 14:56:45 +02:00
Makefile lantiq: add xway_legacy target 2016-06-13 22:51:43 +02:00
config-4.4 lantiq: add cpu temperatur sensor driver for xrx200 2016-08-03 15:30:13 +02:00
modules.mk fix i2c-lantiq module 2012-12-16 10:03:18 +00:00