blogic d7438ce315 lantiq: handle the dual-firmware layout of brnboot ... brnboot based devices can have two Image partitions. When flashing images via the brnboot recovery web interface, the Image partitions are written alternating. The current active Image partition is stored in the first byte of the Primary_Setting partition by using 0x00 for Code_Image_0 and 0x01 for Code_Image_1. By using the information about the active "Code Image", it is possible to ensure that the rootfs belongs to the current booted Image/Kernel. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 49281		2016-05-10 10:43:12 +02:00
..
base-files	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00
dts	lantiq: move partitions into partion table node	2016-05-10 10:43:12 +02:00
files/firmware/lantiq	move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: use sysupgrade.bin postfix for tplink images	2016-05-10 10:43:12 +02:00
patches-4.4	lantiq: handle the dual-firmware layout of brnboot	2016-05-10 10:43:12 +02:00
xrx200	lantiq: add dsl firmware to default packages	2016-03-07 11:03:21 +00:00
xway	lantiq: use dwc2 by default on all ar9 boards	2016-04-26 11:44:17 +00:00
Makefile	lantiq: switch to linux 4.4	2016-01-18 15:54:18 +00:00
config-4.4	lantiq: use upstream mechanism to append device tree file	2016-03-20 14:41:54 +00:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00