openwrt-owl

Go to file

Felix Fietkau d56750665c use rc.common for usb init script SVN-Revision: 6873		2007-04-06 16:07:36 +00:00
docs	Add a paragraph on how to package kernel modules	2007-03-24 10:18:36 +00:00
include	Tidy up Makefiles	2007-04-03 23:03:56 +00:00
package	use rc.common for usb init script	2007-04-06 16:07:36 +00:00
scripts	move gen_busybox_menuconfig.pl to package/busybox	2007-04-04 16:13:54 +00:00
target	meshcube: override the boot loader's (wrong) kernel command line	2007-04-06 14:27:48 +00:00
toolchain	Remove ldd/ldconfig for the moment (#1551 )	2007-04-04 20:24:06 +00:00
tools	mkcsysimg typos	2007-04-03 19:55:10 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Tidy up Makefiles	2007-04-03 23:03:56 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Tidy up Makefiles	2007-04-03 23:03:56 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
rules.mk	revert [6857] for rules.mk; make cannot parse dependancies properly	2007-04-04 09:05:34 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org