mirror of https://github.com/hak5/openwrt-owl.git
339 lines
8.2 KiB
C
339 lines
8.2 KiB
C
/*
|
|
* MikroTik RouterBOARD 2011 support
|
|
*
|
|
* Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
|
|
* Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "rb2011: " fmt
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/ar8216_platform.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/routerboot.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/prom.h>
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-nfc.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "routerboot.h"
|
|
|
|
#define RB2011_GPIO_NAND_NCE 14
|
|
#define RB2011_GPIO_SFP_LOS 21
|
|
|
|
#define RB_ROUTERBOOT_OFFSET 0x0000
|
|
#define RB_ROUTERBOOT_MIN_SIZE 0xb000
|
|
#define RB_HARD_CFG_SIZE 0x1000
|
|
#define RB_BIOS_OFFSET 0xd000
|
|
#define RB_BIOS_SIZE 0x1000
|
|
#define RB_SOFT_CFG_OFFSET 0xf000
|
|
#define RB_SOFT_CFG_SIZE 0x1000
|
|
|
|
#define RB_ART_SIZE 0x10000
|
|
|
|
#define RB2011_FLAG_SFP BIT(0)
|
|
#define RB2011_FLAG_USB BIT(1)
|
|
#define RB2011_FLAG_WLAN BIT(2)
|
|
|
|
static struct mtd_partition rb2011_spi_partitions[] = {
|
|
{
|
|
.name = "routerboot",
|
|
.offset = RB_ROUTERBOOT_OFFSET,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "hard_config",
|
|
.size = RB_HARD_CFG_SIZE,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "bios",
|
|
.offset = RB_BIOS_OFFSET,
|
|
.size = RB_BIOS_SIZE,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "soft_config",
|
|
.size = RB_SOFT_CFG_SIZE,
|
|
}
|
|
};
|
|
|
|
static void __init rb2011_init_partitions(const struct rb_info *info)
|
|
{
|
|
rb2011_spi_partitions[0].size = info->hard_cfg_offs;
|
|
rb2011_spi_partitions[1].offset = info->hard_cfg_offs;
|
|
rb2011_spi_partitions[3].offset = info->soft_cfg_offs;
|
|
}
|
|
|
|
static struct mtd_partition rb2011_nand_partitions[] = {
|
|
{
|
|
.name = "booter",
|
|
.offset = 0,
|
|
.size = (256 * 1024),
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = (256 * 1024),
|
|
.size = (4 * 1024 * 1024) - (256 * 1024),
|
|
},
|
|
{
|
|
.name = "ubi",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct flash_platform_data rb2011_spi_flash_data = {
|
|
.parts = rb2011_spi_partitions,
|
|
.nr_parts = ARRAY_SIZE(rb2011_spi_partitions),
|
|
};
|
|
|
|
static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL3,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
|
|
};
|
|
|
|
static struct ar8327_pad_cfg rb2011_ar8327_pad6_cfg;
|
|
static struct ar8327_sgmii_cfg rb2011_ar8327_sgmii_cfg;
|
|
|
|
static struct ar8327_led_cfg rb2011_ar8327_led_cfg = {
|
|
.led_ctrl0 = 0xc731c731,
|
|
.led_ctrl1 = 0x00000000,
|
|
.led_ctrl2 = 0x00000000,
|
|
.led_ctrl3 = 0x0030c300,
|
|
.open_drain = false,
|
|
};
|
|
|
|
static const struct ar8327_led_info rb2011_ar8327_leds[] __initconst = {
|
|
AR8327_LED_INFO(PHY0_0, HW, "rb:green:eth1"),
|
|
AR8327_LED_INFO(PHY1_0, HW, "rb:green:eth2"),
|
|
AR8327_LED_INFO(PHY2_0, HW, "rb:green:eth3"),
|
|
AR8327_LED_INFO(PHY3_0, HW, "rb:green:eth4"),
|
|
AR8327_LED_INFO(PHY4_0, HW, "rb:green:eth5"),
|
|
AR8327_LED_INFO(PHY0_1, SW, "rb:green:eth6"),
|
|
AR8327_LED_INFO(PHY1_1, SW, "rb:green:eth7"),
|
|
AR8327_LED_INFO(PHY2_1, SW, "rb:green:eth8"),
|
|
AR8327_LED_INFO(PHY3_1, SW, "rb:green:eth9"),
|
|
AR8327_LED_INFO(PHY4_1, SW, "rb:green:eth10"),
|
|
AR8327_LED_INFO(PHY4_2, SW, "rb:green:usr"),
|
|
};
|
|
|
|
static struct ar8327_platform_data rb2011_ar8327_data = {
|
|
.pad0_cfg = &rb2011_ar8327_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
.led_cfg = &rb2011_ar8327_led_cfg,
|
|
.num_leds = ARRAY_SIZE(rb2011_ar8327_leds),
|
|
.leds = rb2011_ar8327_leds,
|
|
};
|
|
|
|
static struct mdio_board_info rb2011_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &rb2011_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init rb2011_wlan_init(void)
|
|
{
|
|
char *art_buf;
|
|
u8 wlan_mac[ETH_ALEN];
|
|
|
|
art_buf = rb_get_wlan_data();
|
|
if (art_buf == NULL)
|
|
return;
|
|
|
|
ath79_init_mac(wlan_mac, ath79_mac_base, 11);
|
|
ath79_register_wmac(art_buf + 0x1000, wlan_mac);
|
|
|
|
kfree(art_buf);
|
|
}
|
|
|
|
static void rb2011_nand_select_chip(int chip_no)
|
|
{
|
|
switch (chip_no) {
|
|
case 0:
|
|
gpio_set_value(RB2011_GPIO_NAND_NCE, 0);
|
|
break;
|
|
default:
|
|
gpio_set_value(RB2011_GPIO_NAND_NCE, 1);
|
|
break;
|
|
}
|
|
ndelay(500);
|
|
}
|
|
|
|
static struct nand_ecclayout rb2011_nand_ecclayout = {
|
|
.eccbytes = 6,
|
|
.eccpos = { 8, 9, 10, 13, 14, 15 },
|
|
.oobavail = 9,
|
|
.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
|
|
};
|
|
|
|
static int rb2011_nand_scan_fixup(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
|
|
if (mtd->writesize == 512) {
|
|
/*
|
|
* Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
|
|
* will not be able to find the kernel that we load.
|
|
*/
|
|
chip->ecc.layout = &rb2011_nand_ecclayout;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init rb2011_nand_init(void)
|
|
{
|
|
gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
|
|
|
|
ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup);
|
|
ath79_nfc_set_parts(rb2011_nand_partitions,
|
|
ARRAY_SIZE(rb2011_nand_partitions));
|
|
ath79_nfc_set_select_chip(rb2011_nand_select_chip);
|
|
ath79_nfc_set_swap_dma(true);
|
|
ath79_register_nfc();
|
|
}
|
|
|
|
static int rb2011_get_port_link(unsigned port)
|
|
{
|
|
if (port != 6)
|
|
return -EINVAL;
|
|
|
|
/* The Loss of signal line is active low */
|
|
return !gpio_get_value(RB2011_GPIO_SFP_LOS);
|
|
}
|
|
|
|
static void __init rb2011_sfp_init(void)
|
|
{
|
|
gpio_request_one(RB2011_GPIO_SFP_LOS, GPIOF_IN, "SFP LOS");
|
|
|
|
rb2011_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
|
|
|
|
rb2011_ar8327_data.pad6_cfg = &rb2011_ar8327_pad6_cfg;
|
|
|
|
rb2011_ar8327_sgmii_cfg.sgmii_ctrl = 0xc70167d0;
|
|
rb2011_ar8327_sgmii_cfg.serdes_aen = true;
|
|
|
|
rb2011_ar8327_data.sgmii_cfg = &rb2011_ar8327_sgmii_cfg;
|
|
|
|
rb2011_ar8327_data.port6_cfg.force_link = 1;
|
|
rb2011_ar8327_data.port6_cfg.speed = AR8327_PORT_SPEED_1000;
|
|
rb2011_ar8327_data.port6_cfg.duplex = 1;
|
|
|
|
rb2011_ar8327_data.get_port_link = rb2011_get_port_link;
|
|
}
|
|
|
|
static int __init rb2011_setup(u32 flags)
|
|
{
|
|
const struct rb_info *info;
|
|
char buf[64];
|
|
|
|
info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
|
|
if (!info)
|
|
return -ENODEV;
|
|
|
|
scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
|
|
(info->board_name) ? info->board_name : "");
|
|
mips_set_machine_name(buf);
|
|
|
|
rb2011_init_partitions(info);
|
|
|
|
ath79_register_m25p80(&rb2011_spi_flash_data);
|
|
rb2011_nand_init();
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
|
AR934X_ETH_CFG_SW_ONLY_MODE);
|
|
|
|
ath79_register_mdio(1, 0x0);
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
mdiobus_register_board_info(rb2011_mdio0_info,
|
|
ARRAY_SIZE(rb2011_mdio0_info));
|
|
|
|
/* GMAC0 is connected to an ar8327 switch */
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
|
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the internal switch */
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5);
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
|
|
ath79_register_eth(1);
|
|
|
|
if (flags & RB2011_FLAG_SFP)
|
|
rb2011_sfp_init();
|
|
|
|
if (flags & RB2011_FLAG_WLAN)
|
|
rb2011_wlan_init();
|
|
|
|
if (flags & RB2011_FLAG_USB)
|
|
ath79_register_usb();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init rb2011l_setup(void)
|
|
{
|
|
rb2011_setup(0);
|
|
}
|
|
|
|
MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011L, "2011L", rb2011l_setup);
|
|
|
|
static void __init rb2011us_setup(void)
|
|
{
|
|
rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB);
|
|
}
|
|
|
|
MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup);
|
|
|
|
static void __init rb2011r5_setup(void)
|
|
{
|
|
rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN);
|
|
}
|
|
|
|
MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup);
|
|
|
|
static void __init rb2011g_setup(void)
|
|
{
|
|
rb2011_setup(RB2011_FLAG_SFP |
|
|
RB2011_FLAG_USB |
|
|
RB2011_FLAG_WLAN);
|
|
}
|
|
|
|
MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011G, "2011G", rb2011g_setup);
|