mirror of https://github.com/hak5/openwrt-owl.git
192 lines
5.1 KiB
C
192 lines
5.1 KiB
C
/*
|
|
* D-Link DAP-2695 rev. A1 support
|
|
*
|
|
* Copyright (c) 2012 Qualcomm Atheros
|
|
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (c) 2016 Stijn Tintel <stijn@linux-ipv6.be>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "pci.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "nvram.h"
|
|
|
|
#define DAP2695_GPIO_LED_GREEN_POWER 23
|
|
#define DAP2695_GPIO_LED_RED_POWER 14
|
|
#define DAP2695_GPIO_LED_WLAN_2G 13
|
|
|
|
#define DAP2695_GPIO_BTN_RESET 17
|
|
|
|
#define DAP2695_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define DAP2695_KEYS_DEBOUNCE_INTERVAL (3 * DAP2695_KEYS_POLL_INTERVAL)
|
|
|
|
#define DAP2695_NVRAM_ADDR 0x1f040000
|
|
#define DAP2695_NVRAM_SIZE 0x10000
|
|
|
|
#define DAP2695_MAC0_OFFSET 1
|
|
#define DAP2695_MAC1_OFFSET 2
|
|
#define DAP2695_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
static struct gpio_led dap2695_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "d-link:green:power",
|
|
.gpio = DAP2695_GPIO_LED_GREEN_POWER,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "d-link:red:power",
|
|
.gpio = DAP2695_GPIO_LED_RED_POWER,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "d-link:green:wlan2g",
|
|
.gpio = DAP2695_GPIO_LED_WLAN_2G,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button dap2695_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Soft reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = DAP2695_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = DAP2695_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct ar8327_pad_cfg dap2695_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
.mac06_exchange_dis = true,
|
|
};
|
|
|
|
static struct ar8327_pad_cfg dap2695_ar8327_pad6_cfg = {
|
|
.mode = AR8327_PAD_MAC_SGMII,
|
|
.sgmii_delay_en = true,
|
|
};
|
|
|
|
static struct ar8327_platform_data dap2695_ar8327_data = {
|
|
.pad0_cfg = &dap2695_ar8327_pad0_cfg,
|
|
.pad6_cfg = &dap2695_ar8327_pad6_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
.port6_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
};
|
|
|
|
static struct mdio_board_info dap2695_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &dap2695_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static struct flash_platform_data dap2695_flash_data = {
|
|
.type = "mx25l12805d",
|
|
};
|
|
|
|
static void dap2695_get_mac(const char *name, char *mac)
|
|
{
|
|
u8 *nvram = (u8 *) KSEG1ADDR(DAP2695_NVRAM_ADDR);
|
|
int err;
|
|
|
|
err = ath79_nvram_parse_mac_addr(nvram, DAP2695_NVRAM_SIZE,
|
|
name, mac);
|
|
if (err)
|
|
pr_err("no MAC address found for %s\n", name);
|
|
}
|
|
|
|
static void __init dap2695_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
u8 mac0[ETH_ALEN], mac1[ETH_ALEN], wmac0[ETH_ALEN];
|
|
|
|
dap2695_get_mac("lanmac=", mac0);
|
|
dap2695_get_mac("wanmac=", mac1);
|
|
dap2695_get_mac("wlanmac=", wmac0);
|
|
|
|
ath79_register_m25p80(&dap2695_flash_data);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(dap2695_leds_gpio),
|
|
dap2695_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, DAP2695_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(dap2695_gpio_keys),
|
|
dap2695_gpio_keys);
|
|
|
|
ath79_register_wmac(art + DAP2695_WMAC_CALDATA_OFFSET, wmac0);
|
|
|
|
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
mdiobus_register_board_info(dap2695_mdio0_info,
|
|
ARRAY_SIZE(dap2695_mdio0_info));
|
|
|
|
/* GMAC0 is connected to the RGMII interface */
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac0, DAP2695_MAC0_OFFSET);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x56000000;
|
|
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the SGMII interface */
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac1, DAP2695_MAC1_OFFSET);
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
|
|
|
ath79_register_eth(1);
|
|
|
|
ath79_register_pci();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_DAP_2695_A1, "DAP-2695-A1",
|
|
"D-Link DAP-2695 rev. A1",
|
|
dap2695_setup);
|