openwrt-owl

Go to file

Rod Whitby cf1faf4778 apex: Updated to 1.5.8 SVN-Revision: 7768		2007-06-29 03:50:09 +00:00
docs	Add a paragraph on how to package kernel modules	2007-03-24 10:18:36 +00:00
include	allow packages to override the patch directory using the PATCH_DIR variable	2007-06-28 07:14:22 +00:00
package	check for + in the broadcast address before attempting a dns lookup	2007-06-29 00:07:43 +00:00
scripts	remove a useless warning	2007-06-12 13:23:43 +00:00
target	apex: Updated to 1.5.8	2007-06-29 03:50:09 +00:00
toolchain	update magicbox target to 2.6.22-rc6, select gcc 4.2.0 as default for this target (4.1.2 segfaults at compile time)	2007-06-28 20:42:21 +00:00
tools	add lzma compression format to mkimage (will be used on infineon amazon)	2007-06-24 04:59:27 +00:00
.gitignore	make top-level .gitignore only apply to top-level files/directories (#1960 )	2007-06-25 10:54:32 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Make UCI preconfiguration optional and disabled by default	2007-05-05 10:06:10 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Regenerate the menuconfig once symlinked packages are gone	2007-05-30 10:37:43 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
rules.mk	don't include .config if DUMP is set	2007-06-26 20:24:55 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org