openwrt-owl/target/linux/generic
Hauke Mehrtens ed0dc1c97e b53: hardcode reset GPIO for Linksys WRT300N 1.1
According to the thread https://forum.openwrt.org/viewtopic.php?id=48281
b53 uses GPIO 7:
[    4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7
and causes device to self-reboot. GPIO 8 was found in CFE boot log:
"Reset switch via GPIO 8 ..."

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41526
2014-07-06 11:40:51 +00:00
..
base-files
files b53: hardcode reset GPIO for Linksys WRT300N 1.1 2014-07-06 11:40:51 +00:00
image
patches-3.3 kernel: fix pkt_type filter mask for packet sockets 2014-06-13 09:34:03 +00:00
patches-3.6 kernel: fix pkt_type filter mask for packet sockets 2014-06-13 09:34:03 +00:00
patches-3.8 kernel: fix pkt_type filter mask for packet sockets 2014-06-13 09:34:03 +00:00
patches-3.9 kernel: fix pkt_type filter mask for packet sockets 2014-06-13 09:34:03 +00:00
patches-3.10 kernel: implement optinal multicast->unicast conversion for igmp snooping 2014-06-28 22:27:54 +00:00
patches-3.12 kernel/3.1{0, 2, 3, 4}: mtd: m25p80: add support for EON EN25QH128 2014-06-16 18:55:01 +00:00
patches-3.13 kernel/3.1{0, 2, 3, 4}: mtd: m25p80: add support for EON EN25QH128 2014-06-16 18:55:01 +00:00
patches-3.14 kernel: implement optinal multicast->unicast conversion for igmp snooping 2014-06-28 22:27:54 +00:00
PATCHES
config-3.3 kernel: add missing config options 2014-07-05 23:35:36 +00:00
config-3.6 kernel: add missing config options 2014-07-05 23:35:36 +00:00
config-3.8 kernel: add missing config options 2014-07-05 23:35:36 +00:00
config-3.9 kernel: add missing config options 2014-07-05 23:35:36 +00:00
config-3.10 kernel: disable CONFIG_IRQ_ALL_CPUS by default 2014-07-02 18:52:36 +00:00
config-3.12 kernel: disable CONFIG_IRQ_ALL_CPUS by default 2014-07-02 18:52:36 +00:00
config-3.13 kernel: disable CONFIG_IRQ_ALL_CPUS by default 2014-07-02 18:52:36 +00:00
config-3.14 kernel: disable CONFIG_IRQ_ALL_CPUS by default 2014-07-02 18:52:36 +00:00