Go to file
Felix Fietkau cb85dcb1a8 ar71xx: mask out reserved bits from the dma tx status in the ethernet driver
SVN-Revision: 18599
2009-11-29 13:38:03 +00:00
docs Add documentation for passphrase option. 2009-09-24 21:50:17 +00:00
include ar71xx: the squashfs-4k images are unreliable in some builds. add 4k, 8k padding to the generic squashfs images and use them on 4k devices as well 2009-11-24 13:55:40 +00:00
package prevent some modules from being built on ubicom32 since they do not compile or link 2009-11-29 00:33:32 +00:00
scripts metadata.pl: fix menuconfig code for package features 2009-11-12 00:06:35 +00:00
target ar71xx: mask out reserved bits from the dma tx status in the ethernet driver 2009-11-29 13:38:03 +00:00
toolchain fix gcc version selection for octeon 2009-11-26 18:44:00 +00:00
tools tools: build old squashfs tools for ar71xx 2009-11-29 09:33:50 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in make lzo compressed initramfs selectable, too 2009-11-21 15:20:11 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default switch back to LuCI main repo 2009-11-07 00:09:53 +00:00
rules.mk fix a typo 2009-10-22 16:39:39 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org