hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
25,239 Commits
4 Branches
8 Tags
169 MiB
C 66.6%
Makefile 16.7%
Shell 8%
Roff 2.7%
Perl 2.1%
Other 3.8%
 
 
 
 
 
 
Go to file
Luka Perkov c90e521790 imx6: update gw5400-a dts 
- remove common imx6q-ventana.dtsi - there isn't enough commonality to
  warrent this
- rename user led's to 1-based
- add alises used by bootloader
- clean up iomux gpios
- fix pfuze slave address
- enable sata
- add delay after release of pci reset downstream from PCIe switch
- remove PCIe clock configuration as its now handled in updated driver

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38081
 		2013-09-20 01:59:33 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include include: add AutoProbe support 2013-09-17 21:45:05 +00:00
package package/mtd: enable seama fixup code for ar71xx 2013-09-19 22:36:40 +00:00
scripts scripts/feeds: ensure that --ff is enabled 2013-09-02 18:25:10 +00:00
target imx6: update gw5400-a dts 2013-09-20 01:59:33 +00:00
toolchain toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05 2013-09-11 14:29:44 +00:00
tools firmware-utils/mktplinkfw: add support for the TL-MR13U board 2013-09-19 17:52:44 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in build: enable MIPS16 again, but make it depend on !gcc-4.6 2013-09-10 14:40:06 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: it is no longer necessary to call make target/linux/clean as part of make clean 2012-12-02 15:26:28 +00:00
README build: BSD compile fixes 2013-03-07 17:32:29 +00:00
feeds.conf.default feeds.conf.default: switch packages feed to git (#13818) 2013-07-05 02:04:40 +00:00
rules.mk build: decouple the mips16 support flag from the toolchain 2013-08-14 13:02:29 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org