openwrt-owl/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c

118 lines
2.9 KiB
C

/*
* Cisco Meraki MR16 board support
*
* Copyright (C) 2015 Chris Blake <chrisrblake93@gmail.com>
*
* Based on Atheros AP96 board support configuration
*
* Copyright (C) 2009 Marco Porsch
* Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010 Atheros Communications
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/mach-ath79/ath79.h>
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#define MR16_GPIO_LED_W4_GREEN 3
#define MR16_GPIO_LED_W3_GREEN 2
#define MR16_GPIO_LED_W2_GREEN 1
#define MR16_GPIO_LED_W1_GREEN 0
#define MR16_GPIO_LED_WAN 4
#define MR16_GPIO_LED_POWER_ORANGE 5
#define MR16_GPIO_LED_POWER_GREEN 6
#define MR16_GPIO_BTN_RESET 7
#define MR16_KEYS_POLL_INTERVAL 20 /* msecs */
#define MR16_KEYS_DEBOUNCE_INTERVAL (3 * MR16_KEYS_POLL_INTERVAL)
#define MR16_WAN_PHYMASK BIT(0)
#define MR16_WMAC0_MAC_OFFSET 0x120c
#define MR16_WMAC1_MAC_OFFSET 0x520c
#define MR16_CALDATA0_OFFSET 0x1000
#define MR16_CALDATA1_OFFSET 0x5000
static struct gpio_led MR16_leds_gpio[] __initdata = {
{
.name = "mr16:green:wan",
.gpio = MR16_GPIO_LED_WAN,
.active_low = 1,
}, {
.name = "mr16:orange:power",
.gpio = MR16_GPIO_LED_POWER_ORANGE,
.active_low = 1,
}, {
.name = "mr16:green:power",
.gpio = MR16_GPIO_LED_POWER_GREEN,
.active_low = 1,
}, {
.name = "mr16:green:wifi4",
.gpio = MR16_GPIO_LED_W4_GREEN,
.active_low = 1,
}, {
.name = "mr16:green:wifi3",
.gpio = MR16_GPIO_LED_W3_GREEN,
.active_low = 1,
}, {
.name = "mr16:green:wifi2",
.gpio = MR16_GPIO_LED_W2_GREEN,
.active_low = 1,
}, {
.name = "mr16:green:wifi1",
.gpio = MR16_GPIO_LED_W1_GREEN,
.active_low = 1,
}
};
static struct gpio_keys_button MR16_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = MR16_KEYS_DEBOUNCE_INTERVAL,
.gpio = MR16_GPIO_BTN_RESET,
.active_low = 1,
}
};
static void __init MR16_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0xbfff0000);
ath79_register_mdio(0,0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = MR16_WAN_PHYMASK;
ath79_register_eth(0);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(MR16_leds_gpio),
MR16_leds_gpio);
ath79_register_gpio_keys_polled(-1, MR16_KEYS_POLL_INTERVAL,
ARRAY_SIZE(MR16_gpio_keys),
MR16_gpio_keys);
ap94_pci_init(mac + MR16_CALDATA0_OFFSET,
mac + MR16_WMAC0_MAC_OFFSET,
mac + MR16_CALDATA1_OFFSET,
mac + MR16_WMAC1_MAC_OFFSET);
}
MIPS_MACHINE(ATH79_MACH_MR16, "MR16", "Meraki MR16", MR16_setup);