mirror of https://github.com/hak5/openwrt-owl.git
133 lines
3.4 KiB
C
133 lines
3.4 KiB
C
/*
|
|
* COMFAST CF-E316N v2
|
|
* by Shenzhen Four Seas Global Link Network Technology Co., Ltd
|
|
*
|
|
* aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
|
|
*
|
|
* Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/timer.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-wmac.h"
|
|
#include "dev-usb.h"
|
|
#include "machtypes.h"
|
|
|
|
static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "cf-e316n-v2:blue:diag",
|
|
.gpio = 0,
|
|
.active_low = 0,
|
|
}, {
|
|
.name = "cf-e316n-v2:red:diag",
|
|
.gpio = 2,
|
|
.active_low = 0,
|
|
}, {
|
|
.name = "cf-e316n-v2:green:diag",
|
|
.gpio = 3,
|
|
.active_low = 0,
|
|
}, {
|
|
.name = "cf-e316n-v2:blue:wlan",
|
|
.gpio = 12,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "cf-e316n-v2:blue:wan",
|
|
.gpio = 17,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "cf-e316n-v2:blue:lan",
|
|
.gpio = 19,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = 60,
|
|
.gpio = 20,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */
|
|
#define EXT_WATCHDOG_GPIO 16
|
|
static struct timer_list gpio_wdt_timer;
|
|
|
|
static void gpio_wdt_toggle(unsigned long period)
|
|
{
|
|
static int state;
|
|
state = !state;
|
|
gpio_set_value(EXT_WATCHDOG_GPIO, state);
|
|
mod_timer(&gpio_wdt_timer, jiffies + period);
|
|
}
|
|
|
|
static void __init cf_e316n_v2_setup(void)
|
|
{
|
|
u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
|
|
u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
|
|
u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
|
|
u8 tmpmac[ETH_ALEN];
|
|
|
|
gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
|
|
gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
|
|
setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
|
|
gpio_wdt_toggle(msecs_to_jiffies(1));
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
|
|
ath79_register_mdio(1, 0x0);
|
|
|
|
/* GMAC0 is connected to the PHY0 of the internal switch */
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask = BIT(0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the internal switch */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2);
|
|
ath79_register_eth(1);
|
|
|
|
/* Enable 2x Skyworks SE2576L WLAN power amplifiers */
|
|
gpio_request(13, "RF Amp 1");
|
|
gpio_direction_output(13, 1);
|
|
gpio_request(14, "RF Amp 2");
|
|
gpio_direction_output(14, 1);
|
|
ath79_init_mac(tmpmac, macwlan, 0);
|
|
ath79_register_wmac(ee, tmpmac);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
|
|
cf_e316n_v2_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(1, 20,
|
|
ARRAY_SIZE(cf_e316n_v2_gpio_keys),
|
|
cf_e316n_v2_gpio_keys);
|
|
|
|
/* J1 is a High-Speed USB port, pin 1 is Vcc */
|
|
ath79_register_usb();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
|
|
cf_e316n_v2_setup);
|