openwrt-owl

Go to file

Michael Büsch c7ac9d3282 bcm47xx: Register a GPIODEV platform device to allow GPIO access via /dev/gpio SVN-Revision: 10623		2008-03-19 10:35:56 +00:00
docs	Fix docs build from a clean checkout, closes #2975	2008-01-07 07:16:00 +00:00
include	remove obsolete symlinkclean target the new make package/symlinks does not need it.	2008-03-19 08:17:56 +00:00
package	fix broken init file and some cleanup	2008-03-18 03:16:32 +00:00
scripts	adding the possibility of local file cache specify file://path_to_file_cache within localmirrors file to add new local file cache	2008-03-18 21:07:22 +00:00
target	bcm47xx: Register a GPIODEV platform device to allow GPIO access via /dev/gpio	2008-03-19 10:35:56 +00:00
toolchain	fix uclibc build on osx	2008-03-09 21:22:31 +00:00
tools	put the dtc to the other host tools (thanks to Thomas)	2008-03-18 20:44:12 +00:00
.gitignore	add package/openwrt-packages to .gitignore	2008-02-09 16:01:34 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add feature flag for the cpio.gz support	2008-01-29 13:56:43 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	use scripts/feeds instead of scripts/feeds.sh for package/symlinks	2007-12-28 17:01:32 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
feeds.conf	Switched xwrt url in feeds.conf (berlios http falls over occasionally)	2008-03-02 22:07:46 +00:00
rules.mk	revert ARM to oabi by default, add some eabi patches for fixing up the toolchain, which unfortunately break eabi userland, but are IMHO a necessary basis for further eabi fixes	2008-02-14 14:31:31 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org