mirror of https://github.com/hak5/openwrt-owl.git
207 lines
7.0 KiB
Diff
207 lines
7.0 KiB
Diff
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
|
Subject: [PATCH 2/2] net: phy: pick Broadcom drivers updates from net-next for
|
|
4.11
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
---
|
|
|
|
--- a/drivers/net/phy/bcm7xxx.c
|
|
+++ b/drivers/net/phy/bcm7xxx.c
|
|
@@ -163,12 +163,43 @@ static int bcm7xxx_28nm_e0_plus_afe_conf
|
|
return 0;
|
|
}
|
|
|
|
+static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
|
|
+{
|
|
+ /* +1 RC_CAL codes for RL centering for both LT and HT conditions */
|
|
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003);
|
|
+
|
|
+ /* Cut master bias current by 2% to compensate for RC_CAL offset */
|
|
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b);
|
|
+
|
|
+ /* Improve hybrid leakage */
|
|
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3);
|
|
+
|
|
+ /* Change rx_on_tune 8 to 0xf */
|
|
+ bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6);
|
|
+
|
|
+ /* Change 100Tx EEE bandwidth */
|
|
+ bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d);
|
|
+
|
|
+ /* Enable ffe zero detection for Vitesse interoperability */
|
|
+ bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
|
|
+
|
|
+ r_rc_cal_reset(phydev);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
|
|
{
|
|
u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
|
|
u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
|
|
int ret = 0;
|
|
|
|
+ /* Newer devices have moved the revision information back into a
|
|
+ * standard location in MII_PHYS_ID[23]
|
|
+ */
|
|
+ if (rev == 0)
|
|
+ rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
|
|
+
|
|
pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
|
|
dev_name(&phydev->dev), phydev->drv->name, rev, patch);
|
|
|
|
@@ -192,6 +223,9 @@ static int bcm7xxx_28nm_config_init(stru
|
|
case 0x10:
|
|
ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
|
|
break;
|
|
+ case 0x01:
|
|
+ ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev);
|
|
+ break;
|
|
default:
|
|
break;
|
|
}
|
|
@@ -336,6 +370,7 @@ static int bcm7xxx_suspend(struct phy_de
|
|
|
|
static struct phy_driver bcm7xxx_driver[] = {
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
|
|
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
|
|
@@ -350,6 +385,7 @@ static struct phy_driver bcm7xxx_driver[
|
|
|
|
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
|
|
{ PHY_ID_BCM7250, 0xfffffff0, },
|
|
+ { PHY_ID_BCM7278, 0xfffffff0, },
|
|
{ PHY_ID_BCM7364, 0xfffffff0, },
|
|
{ PHY_ID_BCM7366, 0xfffffff0, },
|
|
{ PHY_ID_BCM7346, 0xfffffff0, },
|
|
--- a/drivers/net/phy/broadcom.c
|
|
+++ b/drivers/net/phy/broadcom.c
|
|
@@ -30,6 +30,22 @@ MODULE_DESCRIPTION("Broadcom PHY driver"
|
|
MODULE_AUTHOR("Maciej W. Rozycki");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
+static int bcm54210e_config_init(struct phy_device *phydev)
|
|
+{
|
|
+ int val;
|
|
+
|
|
+ val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
|
|
+ val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
|
|
+ val |= MII_BCM54XX_AUXCTL_MISC_WREN;
|
|
+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val);
|
|
+
|
|
+ val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
|
|
+ val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
|
|
+ bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static int bcm54810_config(struct phy_device *phydev)
|
|
{
|
|
int rc, val;
|
|
@@ -230,7 +246,11 @@ static int bcm54xx_config_init(struct ph
|
|
(phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
|
|
bcm54xx_adjust_rxrefclk(phydev);
|
|
|
|
- if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
|
|
+ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) {
|
|
+ err = bcm54210e_config_init(phydev);
|
|
+ if (err)
|
|
+ return err;
|
|
+ } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
|
|
err = bcm54810_config(phydev);
|
|
if (err)
|
|
return err;
|
|
@@ -395,12 +415,10 @@ static int bcm54612e_config_aneg(struct
|
|
(phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
|
|
u16 reg;
|
|
|
|
- /* Errata: reads require filling in the write selector field */
|
|
- bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
|
|
- MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
|
|
- reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
|
|
+ reg = bcm54xx_auxctl_read(phydev,
|
|
+ MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
|
|
/* Disable RXD to RXC delay (default set) */
|
|
- reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
|
|
+ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
|
|
/* Clear shadow selector field */
|
|
reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
|
|
bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
|
|
@@ -548,6 +566,17 @@ static struct phy_driver broadcom_driver
|
|
.config_intr = bcm_phy_config_intr,
|
|
.driver = { .owner = THIS_MODULE },
|
|
}, {
|
|
+ .phy_id = PHY_ID_BCM54210E,
|
|
+ .phy_id_mask = 0xfffffff0,
|
|
+ .name = "Broadcom BCM54210E",
|
|
+ .features = PHY_GBIT_FEATURES,
|
|
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
+ .config_init = bcm54xx_config_init,
|
|
+ .config_aneg = genphy_config_aneg,
|
|
+ .read_status = genphy_read_status,
|
|
+ .ack_interrupt = bcm_phy_ack_intr,
|
|
+ .config_intr = bcm_phy_config_intr,
|
|
+}, {
|
|
.phy_id = PHY_ID_BCM5461,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Broadcom BCM5461",
|
|
@@ -708,6 +737,7 @@ module_phy_driver(broadcom_drivers);
|
|
static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
|
|
{ PHY_ID_BCM5411, 0xfffffff0 },
|
|
{ PHY_ID_BCM5421, 0xfffffff0 },
|
|
+ { PHY_ID_BCM54210E, 0xfffffff0 },
|
|
{ PHY_ID_BCM5461, 0xfffffff0 },
|
|
{ PHY_ID_BCM54612E, 0xfffffff0 },
|
|
{ PHY_ID_BCM54616S, 0xfffffff0 },
|
|
--- a/include/linux/brcmphy.h
|
|
+++ b/include/linux/brcmphy.h
|
|
@@ -17,6 +17,7 @@
|
|
#define PHY_ID_BCM5482 0x0143bcb0
|
|
#define PHY_ID_BCM5411 0x00206070
|
|
#define PHY_ID_BCM5421 0x002060e0
|
|
+#define PHY_ID_BCM54210E 0x600d84a0
|
|
#define PHY_ID_BCM5464 0x002060b0
|
|
#define PHY_ID_BCM5461 0x002060c0
|
|
#define PHY_ID_BCM54612E 0x03625e60
|
|
@@ -24,6 +25,7 @@
|
|
#define PHY_ID_BCM57780 0x03625d90
|
|
|
|
#define PHY_ID_BCM7250 0xae025280
|
|
+#define PHY_ID_BCM7278 0xae0251a0
|
|
#define PHY_ID_BCM7364 0xae025260
|
|
#define PHY_ID_BCM7366 0x600d8490
|
|
#define PHY_ID_BCM7346 0x600d8650
|
|
@@ -103,18 +105,17 @@
|
|
/*
|
|
* AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18)
|
|
*/
|
|
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000
|
|
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00
|
|
#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400
|
|
#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800
|
|
|
|
-#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
|
|
-#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW 0x0100
|
|
-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
|
|
-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000
|
|
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007
|
|
-#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12
|
|
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN (1 << 8)
|
|
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07
|
|
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010
|
|
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100
|
|
+#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
|
|
+#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
|
|
|
|
+#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12
|
|
#define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007
|
|
|
|
/*
|