openwrt-owl/target/linux/lantiq/patches-3.2/0031-MIPS-lantiq-convert-fa...

67 lines
2.0 KiB
Diff

From 96cc1d1baabe7bc6df02e90bcd78e6dde542d384 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 21 Feb 2012 14:25:21 +0100
Subject: [PATCH 31/73] MIPS: lantiq: convert falcon debug uart to clkdev api
On Falcon SoCs we have a secondary serial port that can be used to help
debug the voice core. For the port to work several clocking bits need to
be activated. We convert the code to clkdev api.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/lantiq/falcon/prom.c | 4 +---
drivers/tty/serial/lantiq.c | 7 ++++---
2 files changed, 5 insertions(+), 6 deletions(-)
--- a/arch/mips/lantiq/falcon/prom.c
+++ b/arch/mips/lantiq/falcon/prom.c
@@ -43,10 +43,8 @@ ltq_soc_setup(void)
ltq_register_asc(0);
ltq_register_wdt();
falcon_register_gpio();
- if (register_asc1) {
+ if (register_asc1)
ltq_register_asc(1);
- ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
- }
}
void __init
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -117,6 +117,7 @@ static DEFINE_SPINLOCK(ltq_asc_lock);
struct ltq_uart_port {
struct uart_port port;
+ struct clk *fpiclk;
struct clk *clk;
unsigned int tx_irq;
unsigned int rx_irq;
@@ -319,7 +320,7 @@ lqasc_startup(struct uart_port *port)
struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
int retval;
- port->uartclk = clk_get_rate(ltq_port->clk);
+ port->uartclk = clk_get_rate(ltq_port->fpiclk);
ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
port->membase + LTQ_ASC_CLC);
@@ -646,7 +647,7 @@ lqasc_console_setup(struct console *co,
port = &ltq_port->port;
- port->uartclk = clk_get_rate(ltq_port->clk);
+ port->uartclk = clk_get_rate(ltq_port->fpiclk);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -731,7 +732,7 @@ lqasc_probe(struct platform_device *pdev
port->irq = tx_irq; /* unused, just to be backward-compatibe */
port->mapbase = mmres->start;
- ltq_port->clk = clk;
+ ltq_port->fpiclk = clk;
ltq_port->tx_irq = tx_irq;
ltq_port->rx_irq = rx_irq;