openwrt-owl/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch

25 lines
931 B
Diff

--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -563,4 +563,11 @@ config MTD_NAND_QCOM
Enables support for NAND flash chips on SoCs containing the EBI2 NAND
controller. This controller is found on IPQ806x SoC.
+config MTD_NAND_OXNAS
+ tristate "Support for NAND on Plxtech NAS782X SoC"
+ depends on ARCH_OXNAS
+ help
+ Enables support for NAND Flash chips on Plxtech NAS782X SoCs. NAND is attached
+ to the STATIC Unit.
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_MTD_NAND_SOCRATES) += socr
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
+obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o
obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o