openwrt-owl

Go to file

Imre Kaloz be5080eade sync patch naming schema with the other boards SVN-Revision: 6833		2007-04-02 14:45:38 +00:00
docs	Add a paragraph on how to package kernel modules	2007-03-24 10:18:36 +00:00
include	Typo, nice	2007-04-02 11:42:31 +00:00
package	network config: ignore nonexistant interfaces	2007-04-02 09:41:56 +00:00
scripts	enable zImage generation for the new boards	2007-04-02 14:45:01 +00:00
target	sync patch naming schema with the other boards	2007-04-02 14:45:38 +00:00
toolchain	Fix portability patch for uClibc. Certain versions of GNU cp treat -P as --parent, which is wrong here and -P should be implied by -R already. Fixes build on OSX with fink's fileutils installed.	2007-04-01 11:43:11 +00:00
tools	Fix image generation (sn9)	2007-04-01 11:08:26 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	allow the user to change the rb532 rootfs size in menuconfig (fixes #1374 )	2007-02-28 00:06:37 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	run metadata scanning only once when multiple targets are specified on the command line	2007-03-29 11:26:35 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
rules.mk	Added rule for objdump Added support for AT91 SD-Card in primary bootloader (romboot)	2007-03-22 18:07:01 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org